Overview
The Fabtech FTS7231 is a front Performance Twin Tube Shock Absorber for the 1993–1998 Jeep Grand Cherokee (ZJ), the 1984–1995 Toyota Pickup and the 1998–2004 Toyota Tacoma. It is a hydraulic twin tube unit with a 2.38 inch body, a 9/16 inch chrome hardened piston rod and 9-stage valving, set for a 7 inch lift.
The Performance line is built to pair with Fabtech suspension systems. High velocity 9-stage valving with a closed cell foam insert helps keep damping consistent when the shock is worked hard. Collapsed length is 22.83 in., extended length 13.92 in. and travel length 8.91 in.
Key features
- Hydraulic twin tube with 2.38 inch body
- High flow 9-stage valving
- Closed cell foam insert
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- Front position, set for a 7 in. lift
- White powdercoat finish with blue Fabtech logo
Choosing the right setup
A front twin tube shock controls how quickly the springs compress and rebound, which affects steering feel, body roll and tire contact on rough ground. When a truck carries a lift, the shock must reach its full travel without bottoming or running out of extension, so the collapsed and extended lengths matter as much as the damping rating.
Before ordering, measure the current shock eye to eye and compare the figures with the replacement. Note how the vehicle sits at ride height, since the front end often drops when the old shock is worn. Many owners replace the front shocks as a pair so both sides respond the same way on the trail and on pavement.
- Measure the old shock collapsed and extended before buying
- Check the front end height on level ground
- Replace shocks in pairs for even handling
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7231 |
| UPC | 674866000070 |
| Shock series | Performance Shock |
| Position | Front |
| Shock body | 2.38 inch diameter, twin tube |
| Type | Hydraulic |
| Reservoir | No |
| Collapsed length | 22.83 in. |
| Extended length | 13.92 in. |
| Travel length | 8.91 in. |
| Lower mount | EB1 |
| Upper mount | EB1 |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Insert | Closed cell foam |
| Valving | High flow 9 stage |
| Finish | White powdercoat with blue Fabtech logo |
| Lift setting | 7 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list names 1993–1998 Jeep Grand Cherokee (ZJ) trucks with 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims, 1984–1995 Toyota Pickup trucks, and 1998–2004 Toyota Tacoma models including Base, Limited, Pre Runner, S-Runner and SR5 trims.
Grand Cherokee models from other generations and Tacoma models from later years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both mount codes are EB1 and the lift setting is 7 in., so measure your existing ride height and shock lengths before choosing this unit. Confirm your truck’s trim before fitting, since fit varies by trim.
What’s included
One front shock absorber with a white powdercoat finish.
Not included: Mounting brackets and fasteners are not included. Confirm what your mounts require before starting.


















