Overview
The Fabtech FTS7240 is a rear performance twin tube shock absorber built for a w/6 in. lift. It fits 1999–2014 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks, 2002–2008 Dodge Ram 1500, and 2016–2017 Nissan Titan XD and 2017 Nissan Titan, with trims named in the fitment section below.
Twin tube hydraulic shocks control suspension movement by pushing fluid through internal valving as the wheel travels up and down. This unit has a 2.38 inch diameter body, a 9/16 inch chrome hardened piston rod and a 1 3/8 inch OD piston. The high flow 9 stage valving reduces shock fade at high speeds, and it is designed to pair with Fabtech suspension systems.
Key features
- Performance twin tube hydraulic design with a 2.38 inch diameter body
- High flow 9 stage valving intended to reduce shock fade at high speeds
- Closed cell foam insert inside the shock body
- 9/16 inch chrome hardened piston rod and 1 3/8 inch OD piston
- Rear position, built for a w/6 in. lift
- Hydraulic with no external reservoir
Twin tube shock basics
A twin tube shock has an inner pressure tube and an outer reserve tube, with fluid flowing between them as the piston moves. Because this design has no external reservoir, it keeps a compact profile, which suits trucks with tight rear wheel wells. The valving inside controls how fast fluid moves, and that sets how firm or soft the rear ride feels over each bump.
Rear shocks wear faster on trucks that carry heavy loads or tow, so inspecting the mounts and bushings at each oil change is a good habit. Check the eyes for cracks and make sure the fasteners are snug before a long trip. When one shock is replaced, the other shock on the same axle is usually worth replacing at the same time.
- Oil residue along the body
- Excess bounce after a bump
- Worn or cracked mount bushings
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7240 |
| UPC | 674866007222 |
| Shock series | Performance Shock |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | w/6 in. lift |
| Collapsed length | 29.74 in. |
| Extended length | 17.61 in. |
| Travel length | 12.13 in. |
| Lower mount | EB2 |
| Upper mount | EB2 |
| Reservoir | No |
| Shock body | 2.38 inch diameter twin tube hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Hydraulic / gas charged | Hydraulic |
Vehicle fitment
It fits 1999–2014 Chevrolet Silverado 1500 (Base, High Country, Hybrid, LS, LT, LTZ, WT, Z71); 2007 Chevrolet Silverado 1500 Classic (Hybrid, LS, LT, WT); 2002–2008 Dodge Ram 1500 (Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4); 1999–2014 GMC Sierra 1500 (Base, Denali, HT, Hybrid, SL, SLE, SLT, WT); 2007 GMC Sierra 1500 Classic (Hybrid, SL, SLE, SLT, WT); 2017 Nissan Titan (PRO-4X, Platinum Reserve, S, SL, SV); and 2016–2017 Nissan Titan XD (PRO-4X, Platinum Reserve, S, SL, SV).
Other model years, and Titan models not named above, are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is built for a w/6 in. lift, so check your suspension height against that figure before fitting. Shocks are under spring load, so support the vehicle on stands before removing the old unit.
What’s included
The package is one rear shock with no reservoir. Check the package contents against your installation before starting.


















