Overview
The Fox Racing Shox 2.0 Performance Series Coilover IFP Shock, part number 983-02-050, is a hydraulic, gas-charged coilover shock absorber for off-road and performance suspension work. It is built with black anodized 6061-T6 billet aluminum components and a 5/8″ hard chrome shaft.
IFP stands for internal floating piston, which keeps shock oil separate from the high-pressure nitrogen charge. Its shocks can be valved for specific driving needs and offered in a range of sizes, and this model belongs to the 2.0 Performance Series. Check the fitment against your own vehicle before installing.
Key features
- Black anodized 6061-T6 billet aluminum components
- 5/8″ hard chrome shaft
- Race-developed high-flow piston design
- Redundant sealing pack system
- Internal reservoir keeps shock oil apart from the high-pressure nitrogen
- Hydraulic, gas-charged design in the 2.0 Coilover format
Coilover spring matching
A coilover pairs the shock damper with a coil spring, so the spring rate and the damping must work as one unit. A spring that is too stiff or too soft changes ride height and how the shock behaves near the end of its stroke. Match the spring rate to the vehicle’s weight and use, and set preload only after the shock is secured.
Internal floating piston designs keep oil and gas apart, which helps the shock hold steady damping during long runs over rough ground. Check spring seats and mounts for clearance at full compression, since a coilover that clears at ride height can rub at full travel.
- Check spring seats for wear
- Confirm the spring and shock lengths together
- Use proper spring compressors when servicing
- Recheck preload after the first drive
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 983-02-050 |
| UPC | 70000618115 |
| Series | 2.0 Performance Series Coilover IFP |
| Shaft diameter | 5/8″ hard chrome |
| Materials | Black anodized 6061-T6 billet aluminum components |
| Shock type | Hydraulic, gas charged |
Vehicle fitment
No vehicle is named for this shock, so no year, make, model or trim is confirmed. Direct Fit is the only fitment mark, so check your application first.
Coilover fit depends on mounting style and collapsed and extended length, and none of those measurements are given for this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the mounting ends and overall length of the shock you are replacing with this one before buying. Keep the vehicle supported on stands while you work near the suspension.
What’s included
Check the package contents against your installation before starting.
Not included: Confirm whether a spring and mounting hardware are in the box before installing.







