Overview
The Fox Racing Shox 2.0 Performance Series IFP shock, part number 985-24-061, is a hydraulic gas-charged direct replacement shock absorber with a 2.0 in body diameter and a 5/8 in shaft. It uses OEM direct replacement hardware in the original shock position.
Shock absorbers control how the suspension compresses and rebounds over rough ground. This model uses an internal floating piston to keep shock oil separate from a high-pressure nitrogen gas chamber, which supports a predictable ride on rough roads. The aluminum body is designed to shed heat faster than steel, which suits demanding off-road use.
Key features
- Internal floating piston separates shock oil from a high-pressure nitrogen gas chamber
- Aluminum shock body, which Fox says dissipates heat faster than conventional steel
- Internal reservoir design
- 2.0 in body diameter
- 5/8 in shaft diameter
- Black and aluminum finish
- OEM direct replacement mounting
Gas-charged shock handling
A gas-charged shock holds nitrogen under high pressure, so it should be treated with care at every stage of handling. Keep it away from heat sources, do not cut or puncture the body, and store it upright in a dry place. The pressure is what keeps the damper responsive, so a unit that has been dropped or mishandled should be checked before it goes back on the vehicle.
Wear eye protection during installation and removal, and support the vehicle securely before working near the shock. Clean the shaft after muddy rides and watch for oil film that points to seal wear. A shock that feels soft or spongy may have lost its gas charge and should be inspected by a qualified shop.
- Store upright and dry, away from heat
- Never cut, heat or puncture the body
- Wear eye protection during removal
- Have a qualified shop check any dropped unit
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-061 |
| UPC | 70000668732 |
| Shock type | Hydraulic, gas charged |
| Body diameter | 2.0 in |
| Shaft diameter | 5/8 in |
| Finish | Black and aluminum |
| Reservoir | Internal |
| Travel | Application specific |
| Extended length | Application specific |
| Collapsed length | Application specific |
| Mounting | OEM direct replacement |
Vehicle fitment
No vehicles are confirmed for this shock, and no make, model or model years are named. Travel, extended length and collapsed length are application specific, so measure the original shock and compare before choosing this model.
Confirm your vehicle’s year, model and trim before ordering. Check mounting dimensions against your current shock.
Installation notes
Because this is a gas-charged shock, it is pressurized and should be handled and installed by someone familiar with gas-charged shocks.
What’s included
This is one shock, sold separately.
Not included: Check the package contents against your installation before starting, including bolts and bushings.









