Overview
The Fox Racing Shox 2.0 Factory Series Smooth Body Reservoir Shock with CD Adjuster, part number 985-26-016, is an aluminum direct replacement shock absorber with 24.45 in extended length and 9.6 in stroke. It bolts in at the original shock mounts.
The CD adjuster on this Factory Series model changes compression damping, which controls how firmly the shock resists being compressed over bumps and jumps. Fox says each direct replacement application was tested by its engineers to maximize suspension travel and performance on and off the road.
Key features
- Aluminum construction
- Smooth body reservoir shock design
- CD adjuster for compression damping
- Direct replacement, bolt-on design
- Extended 24.45 in, collapsed 14.85 in, 9.6 in stroke
- Designed to maximize suspension travel on and off the road.
Compression damping adjustment
Compression damping controls how quickly the shock resists being pushed in, which affects how the front or rear end feels over sharp bumps, landings and braking. A firmer setting can reduce pitch and wallow on a highway, while a softer setting can help the wheel track over small rocks. Changes are best made in small steps and tested on a familiar section of road or trail.
An adjuster is only one part of the setup. Tire pressure, spring rate and shock height all change how the shock responds, so adjust them together rather than chasing one feeling. Keep the adjuster area clean and dry, and check the seal near the body for seepage. Re-check the mounting hardware after the first few runs, especially after adjusting the setting.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-26-016 |
| UPC | 70000695015 |
| Series | Fox 2.0 Factory Series |
| Body | Smooth body reservoir shock |
| Adjuster | CD adjuster |
| Material | Aluminum |
| Shock type | Hydraulic, gas charged |
| Extended length | 24.45 in |
| Collapsed length | 14.85 in |
| Stroke | 9.6 in |
| Mounting | Direct fit |
Vehicle fitment
Fit depends on your vehicle’s year, make, model and trim, so confirm those before ordering.
Confirm your vehicle’s year, model and trim before ordering. Compare the 24.45 in extended and 14.85 in collapsed lengths with your original shock.
Installation notes
Because this is a gas-charged shock, it is pressurized and should be handled and installed by someone familiar with gas-charged shocks.
What’s included
The shock is sold alone, so plan any other parts your installation needs.
Not included: Mounting hardware and other components are not included with the shock.









