Overview
The Fox Racing Shox 2.0 Performance Series IFP Shock, part number 980-24-643, is a 2.0 in body direct replacement shock with an internal reservoir for 2WD and 4WD applications. Its travel and lengths vary by application.
Fox engineers test each application to maximize travel and on- and off-road performance. Fox also offers its direct replacement shocks for hundreds of applications and as aftermarket kit replacements, and this model uses OEM direct replacement mounting.
Key features
- 2.0 in body diameter
- 5/8 in shaft diameter
- Internal reservoir
- OEM direct replacement mounting
- Black and aluminum finish
- Hydraulic, gas charged operation
- Designed for 2WD and 4WD applications
Swapping a direct replacement shock
A direct replacement shock is designed to reuse the factory mounting points, so the swap is usually simpler than adding a remote-mount setup. Compare the old and new units side by side, including body size, shaft diameter and the position of the eyes or studs. Matching the shaft diameter matters because it affects the bushings and the strength of the connection to the vehicle.
Shocks wear over time, and the mounts and bushings often wear with them. When you replace a shock, inspect the bushings, bump stops and mounting hardware, and replace any that are cracked or loose. Check that the new shock moves freely through its full range without touching nearby parts, and retighten the fasteners after the first few drives.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-643 |
| UPC | 70000554457 |
| Body diameter | 2.0 in |
| Shaft diameter | 5/8 in |
| Finish | Black and aluminum |
| Reservoir | Internal |
| Mounting | OEM direct replacement |
| Travel, extended and collapsed length | Application specific |
| Operation | Hydraulic, gas charged |
| Application | 2WD and 4WD |
Vehicle fitment
No vehicle is named for this shock. Fox’s copy gives 2WD and 4WD applications only.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the factory shock’s mounts with the OEM direct replacement mounting before removing it. Keep the vehicle supported on stands throughout the swap.
What’s included
Check the package contents against your installation before starting, including the number of shocks you need.
Not included: Fox markets this shock as sold separately, so any second shock needs its own order.








