Overview
The Fox Racing Shox 2.0 Performance Series Smooth Body Reservoir Shock, part number 985-24-118, is a reservoir shock with a 24.80 in extended length, a 15.20 in collapsed length and a 9.60 in stroke. It is a direct fit shock.
The body is made from metal-impacted aluminum, which is designed to reduce heat buildup compared with steel. The internal floating piston keeps the oil apart from a nitrogen gas chamber for a steady ride over rough ground.
Key features
- Smooth body reservoir design
- Metal-impacted aluminum body
- Internal floating piston
- Nitrogen gas chamber
- 24.80 in extended length
- 15.20 in collapsed length
- 9.60 in stroke
- Direct fit
Reservoir shock installation checks
A reservoir shock needs clearance for the reservoir body as well as the shock itself. Before fitting, check the path of the reservoir against the frame, body panels, wheel well and brake lines, because hard parts can rub once the suspension moves. Because this design uses a separate body and gas chamber, avoid mounting it at an angle that cramps the reservoir or its hose.
Gas-charged shocks are under pressure, so handle them with care and avoid heating the body during removal. Keep the vehicle stable on stands, and loosen the mounting hardware only after the weight is supported. Once installed, cycle the suspension by hand and look for binding or contact. Recheck the mounting bolts after the first few drives, especially on rough trails where the body takes repeated impacts.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-118 |
| UPC | 700007190445 |
| Body | Smooth body, metal-impacted aluminum |
| Extended length | 24.80 in |
| Collapsed length | 15.20 in |
| Stroke | 9.60 in |
| Operation | Hydraulic, gas charged |
| Mounting | Direct fit |
Vehicle fitment
It is designed for direct fit replacement. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a reservoir design, allow room for the reservoir body and check it against your suspension before fitting. Use jack stands whenever the vehicle is raised for the change.
What’s included
Check the package contents against your installation before starting, including any hardware you need.








