Overview
The Fox Racing Shox 2.0 Performance Series reservoir shock, part number 980-24-945, is a single external-reservoir shock absorber for the rear suspension of 2WD and 4WD vehicles. It is a bolt-on package with a metal-impacted aluminum body designed for rough conditions.
The smooth shock body is made of metal-impacted aluminum, which Fox says dissipates heat faster than conventional steel. Inside, an internal floating piston (IFP) separates the shock oil from a high-pressure nitrogen gas chamber, which Fox says gives a predictable ride quality. The unit is gas charged.
Key features
- External reservoir design
- Smooth body with metal-impacted aluminum shock body
- Internal floating piston separates shock oil from the nitrogen gas chamber
- Hydraulic, gas-charged damping
- Single shock for 2WD and 4WD rear applications
- Bolt-on package
Rear shock service and wear
Rear shocks wear from heat, dirt and repeated impacts. Common signs include oil on the outside of the body, a loose-feeling rebound, bounce after bumps, and uneven rear tire wear. Look at the shaft seal and the body for scoring, and check the mounting eyes for cracks or play. A shock that has lost its gas charge may feel soft or spongy over sharp bumps, even when it still looks sealed.
External reservoirs add a hose or canister that must be kept clear of rubs against the frame, springs and tires. After installation, check the reservoir mount and hose routing at full compression and full droop. Clean the shaft after off-road use to keep dirt from working into the seal, and recheck the bolts after the first few trips. Replacing both rear shocks at once keeps damping even.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-24-945 |
| UPC | 70000618101 |
| Product line | Fox 2.0 Performance Series |
| Shock type | Single, external reservoir, hydraulic / gas charged |
| Body | Smooth body, metal-impacted aluminum |
| Extended length | 27.45 in |
| Collapsed length | 16.35 in |
| Travel | 11.1 in |
| Position | Rear, 2WD and 4WD |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. This shock is designed for rear applications on 2WD and 4WD vehicles.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 27.45 in extended and 16.35 in collapsed lengths with your existing rear shock before installing, and allow room for the external reservoir.
What’s included
Check the package contents against your installation before starting, including mounting hardware.









