Overview
The Trail Gear 1.25 Inch Creeper Joint, part 110760-KIT, is a forged left-hand thread rod end for flexible suspension links. Trail Gear positions it as a heavy-duty joint for systems that flex under load, and a jam nut is included.
A single-piece forged shell houses an 8620 tool steel flex ball set on polyurethane bushings. Hardened steel washers hold the assembly together, and the joint is serviceable, with a threaded grease fitting on the top.
Key features
- Left-hand thread
- Single-piece forged outer shell
- 8620 tool steel flex ball
- Polyurethane bushings and hardened steel washers
- Serviceable, with a grease fitting on top
- Jam nut included
Left-hand thread notes
Left-hand thread joints go on one side of a link pair, and the thread direction tells you which side it belongs on. Check the link and bracket on both sides before assembly so the joints mate correctly. Mixing up thread direction is a common mistake, and it usually shows up as a joint that loosens or a jam nut that will not seat. Mark the parts as you go.
Because the joint is serviceable, it can be rebuilt once the wear points are known. Keep the bushings and washers clean when reassembling, and check the flex ball for scoring. Grease the top fitting at regular intervals so the cross-lubrication path reaches the mount bolt. Replace the joint once it develops play or cracks in the shell.
- Confirm thread side before assembly
- Secure the jam nut after setting length
- Grease at regular service intervals
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110760-KIT |
| UPC | 70000621324 |
| Size | 1.25 inch |
| Joint details | Finished joint |
| Type | Forged |
| Maintenance | Serviceable |
| Thread direction | Left |
| Flex ball material | 8620 tool steel |
| Bushings | Polyurethane |
| Articulation | Up to 40 degrees with spacers |
Vehicle fitment
The joint is universal fit, so suitability depends on the link and bracket it is installed on.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the thread direction against the link before assembly. The flex ball is drilled for cross lubrication, so grease entering the top fitting reaches the link mount bolt as well.
What’s included
One finished left-hand joint and a jam nut are included.
Not included: Spacers are used with the joint to reach up to 40 degrees of movement.








