Overview
Trail Gear’s 110775-KIT is a 1 inch creeper joint with left-hand thread, a forged rod end built for flexible suspension links. Its job is to let a link pivot freely at each end as the suspension moves, which is why the maker markets it for today’s flexible suspension systems.
The outer shell is one forged piece. The inner flex ball is 8620 tool steel that runs on polyurethane bushings, with heavy-duty hardened steel washers holding everything together. The joint is serviceable, and a grease fitting on top lets you lubricate it without taking it apart.
Key features
- Forged outer shell in one piece
- 8620 tool steel flex ball
- Polyurethane bushings with hardened steel washers
- Movement of up to 40 degrees when spacers are used
- Top-mounted threaded grease fitting
- Cross lubrication passage from the shell to the link mount bolt
- Jam nut included with each joint
Matching thread and link end
Thread direction is the detail most often missed on a link swap. A left-hand joint will thread into a left-hand link end only, so compare both parts before any cutting, threading or pressing. Lay the old and new pieces side by side and count the threads or check the markings so the length you set stays close to the original.
The forged shell and 8620 tool steel ball suit flexible links that need a wide range of motion. Keep the spacers, mounts and bolts that came with your setup so the joint lines up as it did before. Once the length is set, tighten the jam nut and grease the fitting so the ball has a film of lubricant from the start.
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110775-KIT |
| UPC | 70000621320 |
| Joint size | 1 inch |
| Joint details | Finished joint |
| Type | Forged |
| Thread direction | Left |
| Flex ball | 8620 tool steel |
| Bushings | Polyurethane |
| Washers | Heavy-duty hardened steel |
| Movement | Up to 40 degrees with spacers |
| Maintenance | Serviceable |
Vehicle fitment
The maker marks this joint Universal Fit and does not tie it to a specific year, make or model. As a link component, its suitability depends on the link end dimensions and the mount it bolts into on your vehicle.
No vehicle-specific fitment is confirmed for this joint. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Left-hand thread means the joint must be matched to a left-hand link end, so check the thread on the part being replaced first. Grease through the top fitting after installation, and tighten the included jam nut to hold the length you set.
What’s included
Each joint comes with a jam nut, and the top grease fitting is supplied threaded into the joint.
Not included: Links, mounts, bolts and spacers are not part of this package.









