Overview
The Trail Gear 1.25 Inch Creeper Joint, part 110757-KIT, is a forged rod end with a right-hand thread for flexible suspension links on off-road vehicles. It is a heavy-duty joint for flexible suspension systems, and each joint comes with a jam nut.
The outer shell is one forged piece. The inner flex ball is 8620 tool steel and rides on polyurethane bushings, with hardened steel washers holding the assembly together. The joint is serviceable and articulates up to 40 degrees when used with spacers.
Key features
- Single-piece forged outer shell
- Inner flex ball of 8620 tool steel
- Polyurethane bushings and hardened steel washers
- Up to 40 degrees of movement when used with spacers
- Threaded grease fitting on top, with cross lubrication through the ball
- Jam nut included
Creeper joint articulation
A creeper joint is a rod end that lets a flexible link move through a wider arc than a standard joint. On a flexing suspension, the joint takes the twisting and angle changes between the link and the bracket. Choose the size and thread direction to match the link before ordering, since a mismatched joint will bind or wear quickly.
Joints of this type wear through the bushings and flex ball. Grease the top fitting during regular service and look for grease coming out of the seal, which suggests the seal or bushing is wearing. Check for play by hand, look for cracks in the forged shell, and replace the joint once it feels loose or rough through its range of motion.
- Match size and thread before ordering
- Grease fitting at regular service
- Replace joints with play or cracks
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110757-KIT |
| UPC | 70000621326 |
| Size | 1.25 inch |
| Joint details | Finished joint |
| Type | Forged |
| Maintenance | Serviceable |
| Thread direction | Right |
| Flex ball material | 8620 tool steel |
| Bushings | Polyurethane |
| Articulation | Up to 40 degrees with spacers |
Vehicle fitment
The joint is universal fit, so no specific vehicle is named. Match the link and bracket to the joint before installing.
Check that the 1.25 inch size and right-hand thread match the link or bracket you are replacing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flex ball is drilled for cross lubrication from the shell to the link mount bolt, so the grease fitting on top serves the whole joint. Support the vehicle securely before working on the suspension links.
What’s included
One finished joint with a jam nut is included.
Not included: Spacers are used with the joint to reach up to 40 degrees of movement.









