Overview
The Trail Gear 1-inch Creeper Joint, part number 110772-KIT, is a heavy-duty rod end joint for flexible suspension links. A rod end connects a link to a bracket and lets the link swivel as the suspension moves, which is why these joints suit long arm and link systems. It is designed for today’s flexible suspension systems.
The outer shell is a single forged piece. The inner flex ball is made from 8620 tool steel and rides on polyurethane bushings, with heavy-duty hardened steel washers holding the joint together. The joint allows up to 40 degrees of movement when used with spacers.
- Single-piece forged outer shell
- 8620 tool steel flex ball
- Polyurethane bushings and hardened steel washers
- Threaded grease fitting on top
- Flex ball drilled for cross lubrication
- Right-hand thread, serviceable, with a jam nut included
Rod end care and inspection
Rod ends and joints like this one are the pivot points of a link system, so their condition affects steering stability, alignment and how the suspension tracks. Wear shows up as play, clunking or uneven tire wear, and it tends to grow as bushings and washers break down under load.
When installing a joint, clean the bore and bolt before fitting, set the jam nut to lock the threads, and make sure the joint moves through its range without binding against the link or bracket. Keep the grease fitting topped up on a regular schedule, since grease is the main protection for the flex ball.
- Match bore, bolt diameter and thread before ordering
- Use spacers when full movement is needed
- Check the jam nut after the first few drives
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110772-KIT |
| UPC | 70000621323 |
| Joint details | Finished joint |
| Type | Forged |
| Flex ball | 8620 tool steel |
| Bushings | Polyurethane |
| Washers | Hardened steel |
| Movement | Up to 40 degrees with spacers |
| Lubrication | Threaded grease fitting |
| Thread direction | Right |
| Maintenance | Serviceable |
Vehicle fitment
No vehicle is named for this joint. Match it to the link’s bore, bolt diameter and thread, and measure the link before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The flex ball is drilled so grease flows from the shell to the link mount bolt, so lubricating the grease fitting on top also reaches the mount. Full movement needs the spacers that Trail Gear describes.
What’s included
One joint with a jam nut.
Not included: the link, the mount and the spacers that Trail Gear says are needed for full movement.











