Overview
The TeraFlex FlexArm Kit, part number 1951100, is a joint rebuild kit for TeraFlex FlexArm joints. It includes the replacement components needed to rebuild a FlexArm joint, which is useful when the joint’s tolerances have worn.
Grit, grime, dust and fluids all wear down the bushings over time. TeraFlex recommends rebuilding the joint periodically to keep it functioning correctly and restore it to top working condition. The kit is marked universal fit.
Key features
- Includes a chrome plated misalignment ball
- Two urethane bushings for the joint
- Large retainer washer and snap ring
- Periodic rebuild helps restore joint tolerances worn by grit, grime and fluids
Joint wear and rebuild timing
A FlexArm joint works through a small set of wear parts, so its feel changes gradually. Looseness, clicking or uneven movement usually show that the bushings or retaining parts need attention. Inspecting the joint by hand, with the vehicle safely supported, is the simplest way to judge when a rebuild is due.
Rebuilding the joint is most useful when the wear is caught early, before the arm and housing take damage. Keep the work area clean and free of grit, because contamination is what wears the bushings in the first place. Dirty or dried fluids should be cleaned away before reassembly so fresh parts start clean.
- Play or clunking at the joint
- Dried grit or fluid around seals
- Inspect again after rough trail use
- Clean all surfaces before reassembly
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1951100 |
| UPC | 843885024699 |
| Kit type | FlexArm joint rebuild kit |
| Misalignment ball | Chrome plated |
| Bushings | Two urethane |
| Retaining hardware | Large retainer washer and snap ring |
| Fitment | Universal fit |
Vehicle fitment
The kit is marked universal fit, so it is not tied to a named vehicle. It is for TeraFlex FlexArm joints, so match it to the joint you are servicing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit replaces the wear parts inside the joint. Work on suspension joints is safest with the vehicle supported on stands, and a joint rebuild usually involves pressing parts in and out, so use the correct tools.
What’s included
Chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring.
Not included: Check the package contents against your installation before starting.








