A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
Leaf Spring
Showing 73–84 of 278 resultsSorted by popularity
-
Leaf Spring
Skyjacker 3 Inch Softride Leaf Spring – JC25RSB
- Fits 1984–2001 Jeep Cherokee (XJ) per manufacturer list, rear position
- Part number JC25RSB, 3 inch lift, sold as a single spring
- Progressive multileaf pack in American steel
- Rubber bushings included; limited lifetime warranty.
SKU: SKYJC25RSB -
Leaf Spring
Skyjacker 4 Inch Softride Leaf Spring – J40RSB
- Covers Jeep CJ5 (1976–1983), CJ7 (1976–1986) and Scrambler (1981–1985) on the manufacturer list
- Rear Softride leaf spring, part number J40RSB, sold as a single spring
- Bushings not included; recommended bushing part number SKYSE45J
- Tapered leaves, bolt-style clips and American steel
SKU: SKYJ40RSB -
Leaf Spring
Skyjacker Softride Rear Leaf Spring – J40RS
- Fits Jeep CJ5 (1976–1983), CJ7 (1976–1986) and Scrambler (1981–1985) per manufacturer list
- Rear Softride leaf spring, part number J40RS, sold individually
- Rubber bushings included; American steel shot-peened leaves
- For use with 3.5-4 inch lifted springs; lift height range 0 to 4.99 inches
SKU: SKYJ40RS -
Leaf Spring
Skyjacker 4 Inch Softride Leaf Spring – J40FSB
- Fits Jeep CJ5 (1976–1983), CJ7 (1976–1986) and Scrambler (1981–1985) per manufacturer list
- Front Softride leaf spring, part number J40FSB, sold as a single spring
- Tapered leaves, bolt-style spring clips and American steel
- Bushings not included; lift height range 0 to 4.99 inches
SKU: SKYJ40FSB -
Leaf Spring
Skyjacker Softride Rear Leaf Spring – J34RS
- Fits Jeep CJ5 and CJ6 (1959–1960, 1966–1975) and Willys CJ-5 and CJ-6 (1955–1958) per the manufacturer list
- Rear Softride leaf spring, part number J34RS, sold as a single spring
- American steel with shot-peened leaves
- Lift height range 0 to 4.99 inches; for use with 3.5-4 inch lifted springs
SKU: SKYJ34RS -
Leaf Spring
Skyjacker Softride Leaf Spring – J34FS
- Fits 1959 to 1960 and 1966 to 1975 Jeep CJ5, 1959 to 1960 CJ6, and 1955 to 1958 Willys CJ-5 and CJ-6
- Front single leaf spring for 3.5 to 4 inch lifted springs
- Requires additional SKYSE34J bushings
- Skyjacker part number J34FS, American steel
SKU: SKYJ34FS -
Leaf Spring
Skyjacker Softride Rear Leaf Spring – J32RS
- Rear Softride leaf spring for 1959–1960 and 1966–1975 Jeep CJ5 and CJ6, and 1955–1958 Willys CJ-5 and 1956–1958 Willys CJ-6.
- Use with 2-2.5 inch lifted springs; sold individually.
- Bushings not included per the short bullets.
- Lift height range 0 to 4.99 inches; part number J32RS, UPC 803696144078.
SKU: SKYJ32RS -
Leaf Spring
Skyjacker Softride Leaf Spring – J32FS
- Fits 1959 to 1960 and 1966 to 1975 Jeep CJ5, 1959 to 1960 CJ6, and 1955 to 1958 Willys CJ-5 and CJ-6
- Front single leaf spring, lift height range 0 to 4.99 inches
- Use with 2-2.5 inch lifted springs
- Skyjacker part number J32FS, American steel
SKU: SKYJ32FS -
Leaf Spring
Skyjacker 2.5 Inch Softride Leaf Spring – J20RSB
- Fits 1976 to 1983 Jeep CJ5, 1976 to 1986 CJ7 and 1981 to 1985 Scrambler models in the trims covered.
- Rear single leaf spring for a 2.5 inch Softride setup, lift height range 0 to 4.99 inches
- Bushings sold separately, part number SKYSE45J
- Skyjacker part number J20RSB, American steel
SKU: SKYJ20RSB -
-
Leaf Spring
Skyjacker 2.5 Inch Softride Leaf Spring – J20FSB
- Covers CJ5 (1976–1983), CJ7 (1976–1986) and Scrambler (1981–1985) models.
- Front Softride leaf spring, 2.5 inch version, sold individually.
- Rubber bushings included.
- Lift height range 0 to 4.99 inches; part number J20FSB, UPC 803696212678.
SKU: SKYJ20FSB -
What leaf springs do
A leaf spring is a stack of curved steel plates that supports the vehicle, locates the axle and absorbs bumps. Heavy-duty trucks, older Jeeps such as the CJ and YJ, and many pickups use them front, rear or both. Because the spring also positions the axle, a worn or sagging pack affects ride height, handling and load capacity.
Replacement versus lift springs
Factory-height replacements restore factory ride when the original arch has flattened. Lift springs are built with extra arch to raise the vehicle, with listings here ranging from about 1.5 inches to 8 inches. Softer, multi-leaf or progressive designs improve ride quality, while heavier or extreme-duty packs favor load carrying and towing. A lighter spring pack on a truck that regularly hauls or tows can bottom out, so match spring rate to how the vehicle is used.
Details to check before choosing
- Position: front or rear, and whether it is a single spring or sold as one of a pair. Many listings are sold each, so you may need two.
- Bushings: some springs include them, others list a recommended bushing part number separately.
- Lift height: this is a nominal figure and the final height depends on vehicle weight, load and condition of other parts.
- Number of leaves and rate: affects ride firmness and capacity.
- Drivetrain related parts: a taller spring may call for shock extensions, longer brake lines, and driveline or pinion angle correction.
Installation notes
Replace springs in axle pairs to keep ride height even. Support the vehicle on rated jack stands, never on the springs or a jack alone. Fit new U-bolts and tighten shackle and spring-eye hardware to specification with the vehicle's weight on the suspension, which avoids bushing preload. Have an alignment and a driveline check done afterward. Professional installation is wise if you are not experienced with suspension work, since a loose spring or axle can be dangerous.
It helps to understand how spring design affects behavior. A multi-leaf pack with many thin plates tends to ride more softly and resists a harsh feel, but it can sag sooner under constant load. A pack with fewer leaves, often called a softride or parabolic style, reduces friction between plates and gives a smoother ride with less stiction. Heavier packs with added leaves carry more weight and resist squat when towing, at the cost of a firmer ride when unloaded.
Wear items matter just as much as the springs. Inspect shackles, hangers, spring eye bolts, center pins and U-bolts whenever you service the suspension, and replace any that are bent, cracked or worn. Rust between leaves and sagging at one corner are common signs that a pack is due for replacement. Keep in mind that a truck that has been regularly overloaded may need a heavier pack, not just a like-for-like replacement, and that mixing different spring rates side to side makes the vehicle lean and handle unpredictably.
Confirming fitment
Leaf spring part numbers are specific to year, make, model, cab and bed configuration, and sometimes axle type. Verify your exact application and the manufacturer's specifications before choosing a product below.
Related guides
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
- Traction Bars vs Ladder Bars: Stopping Axle Wrap
Traction bars vs ladder bars: what axle wrap is, how each design stops it, Pro Comp, Fabtech and Tuff Country fitment, alternatives and install…
Popular Leaf Spring brands
- Skyjacker (109)
- ARB 4x4 Accessories (43)
- Pro Comp Suspension (38)
- Tuff Country (24)
- Crown Automotive (15)
- Omix-Ada (13)
- Rubicon Express (12)
- Fabtech (11)
- Trail Gear (8)
- Rancho (7)
- Icon Suspension (3)
- Revtek (1)
Leaf Spring FAQ
Do leaf springs need to be replaced in pairs?
Yes, it is best practice. Replacing only one side can leave uneven ride height and handling, because the new spring will have a different arch and rate than the worn one. Replacing both sides on the same axle keeps the vehicle level.
Are leaf springs sold as a single spring or a pair?
Many listings are sold each, with notes such as order two for a pair. Read the product page carefully for quantity wording, then order the number you need for the axle. Some product descriptions also say whether bushings are included.
Will new leaf springs lift my truck?
Only if they are lift springs. Stock-replacement packs restore factory height, while lift springs have extra arch for a stated increase. Actual height varies with vehicle weight and load, and you may need extended shocks, brake lines or driveline corrections.
Do I need an alignment after changing leaf springs?
An alignment is a good idea, especially on the front axle, and the rear thrust angle matters on some vehicles. Changing springs shifts axle position slightly, so have alignment and driveline angles checked after installation.



