Overview
The Omix-ADA 18290.12 is a complete leaf spring kit that replaces the front and rear springs on the 1987–1995 Jeep Wrangler YJ. It is a set of four springs with polyurethane bushings included, so both ends of the suspension can be serviced with one kit.
Shock absorbers are not part of this kit, so the existing shocks remain separate items to inspect or replace during the job.
Key features
- Front and rear positions covered in one kit
- Set of four springs
- Polyurethane bushings included
- Direct fit at stock height
- Shock absorbers not included
Shock absorbers and related wear
When a leaf spring kit goes in, the shock absorbers are often the next part to check. Worn shocks let the vehicle bounce and wallow, and they can make a new spring feel harsh or loose. Inspect them for leaks, damaged mounts and worn bushings while the suspension is apart, so the new springs are paired with shocks in good condition.
Polyurethane bushings are firmer than rubber and last longer in most uses, but they need the right lubrication and tightening at installation. Use the factory torque for the spring fasteners, and recheck them after the first few drives. Keep the springs clear of mud and road debris, and inspect the bushings each time the vehicle is serviced.
- Shock absorber mounts and bushings
- Spring hanger and shackle wear
- Brake lines routed clear of the springs
- Fastener torque after initial drives
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18290.12 |
| UPC | 804314288396 |
| Position | Front and rear |
| Spring quantity | Set of 4 |
| Bushings | Polyurethane bushings included |
| Lift height range | Stock height, direct replacement |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
It does not fit later Wrangler generations or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends of the vehicle come off their old springs during this job, so support the frame and axles on stands before starting. Inspect the existing shock absorbers while the suspension is apart, since they are not included.
What’s included
Front and rear leaf springs, a set of four, with polyurethane bushings.
Not included: Shock absorbers.








