Overview
The Omix-ADA 18202.11 is a rear replacement leaf spring for the 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler. It is a six-leaf spring stack built to original Jeep specifications as a direct OE replacement, so it restores the factory rear ride height rather than adding lift.
Each spring stack covers one side of the rear axle, so a full rear replacement takes two. Omix-ADA backs the 18202.11 with a limited five-year manufacturer warranty. Bushings are not included with this spring, so check the bushing eyes before installing it.
Key features
- Direct OE replacement built to the original Jeep specifications
- Rear position, single spring stack per side
- Six leaves
- Rated for stock height, not a lift spring
- Bushings not included
- Limited five-year manufacturer warranty
Rear spring load and shackles
The six-leaf rear pack on a CJ7 or Scrambler carries the axle weight across rough trails and everyday driving, so the arch and leaf condition affect ride and handling. A spring with a flattened arch lets the rear sit low and can shift the axle under braking. Look for cracked leaves and uneven sag, which often appear together.
Shackles and their bushings take much of the movement as the spring flexes. Worn shackles let the spring walk forward and back, causing clunks and misalignment of the axle. Check the shackle plates for cracks and the pins for wear. Replacing them with the spring keeps the new part working as designed and avoids repeating the job soon after.
- Shackle pins and bushings
- Bump stops at the axle
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18202.11 |
| UPC | 804314036577 |
| Position | Rear |
| Spring quantity | Single spring |
| Leaf count | 6 leaf |
| Bushings | Not included |
| Lift height range | Stock height, direct replacement |
| Warranty | Limited five-year manufacturer warranty |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
Models outside these three, including the 1987–1995 Jeep Wrangler YJ, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Leaf springs carry the weight of the rear axle, so support the frame on stands before the old spring is removed. Because bushings are not supplied, inspect the spring eyes and hardware and replace any worn parts during the swap.
What’s included
One rear leaf spring stack built to original Jeep specifications.
Not included: Bushings.







