Select your vehicle

Rancho 1.5 Inch Leaf Spring – RS44148

Rancho

Shop Jeep Cherokee XJ Leaf Springs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS44148 rear leaf spring with 1.5 inch lift
  • Fits 1984–2001 Jeep Cherokee (XJ)
  • Bushings not included
  • Sold individually; two required

Description

Overview

The Rancho RS44148 is a 1.5 inch rear leaf spring for the 1984 to 2001 Jeep Cherokee (XJ). It is sold individually, two are required, and bushings are not included, so they must be sourced separately.

Key features

  • Springs preset to limit settling
  • Leaf ends trimmed to reduce friction
  • Individual leaves shot-peened for fatigue life
  • Rear position for the XJ Cherokee

Choosing and fitting leaf springs

A leaf spring stack carries axle load and holds the axle in place fore and aft, so it shapes ride height, wheel travel and how the rear end reacts on uneven ground. Over time leaves can take a set, eye bushings wear and the spring can sag, which often shows up as a lower rear corner or a rear end that bounces longer than it used to.

When a lift is involved, compare the new rear height with the front, since a mismatch changes caster and driveline angles. Shock length and brake line length are worth checking too, because the axle moves to a new position. Replacing bushings at the same time as the springs keeps the new springs seated the way they were designed to be.

  • Inspect the leaves for cracks or broken pack clips
  • Check eye bushings for play before fitting
  • Torque U-bolts after the first few drives

Specifications

Brand Rancho
Part number RS44148
UPC 39703441483
Lift 1.5 inch
Lift height range 0 to 4.99 inches
Position Rear
Spring quantity Single spring
Bushings Not included
Quantity required Two

Vehicle fitment

The manufacturer list covers the 1984 to 2001 Jeep Cherokee (XJ) with Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.

Wrangler, Grand Cherokee and Liberty models are not in this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Bushings are not included, so have them on hand before fitting the springs. Lift changes affect alignment, so have the alignment checked afterward.

What’s included

One rear leaf spring, sold individually.

Not included: bushings and the second spring.

SKU: RANRS44148 Category:

Specification

Shipping weight 36.80 lbs
Package dimensions 52.00 × 6.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–2001Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the RS44148 a rear spring?

Yes. It fits the rear position on the 1984 to 2001 Jeep Cherokee (XJ). It is a 1.5 inch lift spring with a lift height range of 0 to 4.99 inches.

Are bushings included with the RS44148?

No. Bushings are not included, so source them separately. The spring is sold individually, and two are required for the rear.

Does it fit a 1990 Cherokee XJ?

Yes. 1990 falls within the listed 1984 to 2001 Jeep Cherokee (XJ) range, which names trims including Base, Laredo, Limited and Sport. Confirm your trim before installing.

How do I know if the rear springs need replacing?

Look for a rear corner that sits lower than the other, a rear end that keeps bouncing after bumps, or cracked or shifted leaves. Measure ride height on both sides and inspect the leaf pack and eye bushings. Replacing the springs in pairs is usually the more balanced choice.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Cherokee XJ Leaf Springs on Amazon