Overview
The Omix-ADA 18202.04 is a rear replacement leaf spring with a 9 leaf pack, designed to match the original stock height. It is a direct fit for the 1956–1963 Jeep 6-226 (Base).
Because the spring is a stock replacement, it restores factory rear height without lifting the vehicle. No bushings are included with the spring.
Key features
- Nine leaf rear spring pack
- Stock height direct replacement
- Built to original Jeep specifications as a direct OE replacement from Omix-ADA.
- Bushings not included
Pairing rear springs on a 6-226
Rear springs on a 6-226 Jeep work as a matched pair, so the two sides should match in arch and height. A spring that has aged differently from the opposite one will pull the vehicle to that side and can change how the axle tracks. Measure the height at the same point on each side before deciding which parts to replace.
Look over the rest of the rear suspension while the spring is out. Shackles, shackle pins and eye bushings often wear at the same time as the spring and can cause clunks or sloppy steering feel. Check the spring perches and U-bolts for rust and fatigue, and replace any part that will not hold its position once the new spring is in place.
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18202.04 |
| UPC | 804314011031 |
| Position | Rear |
| Leaves | 9 |
| Spring quantity | Single spring |
| Bushings | Not included |
| Lift height range | Stock height, direct replacement |
| Warranty | Limited five year manufacturer warranty |
Vehicle fitment
The manufacturer list shows this spring only for the 1956–1963 Jeep 6-226 (Base).
No other Jeep models or years are on this list, including the CJ5 and CJ6 years covered by other springs in this range. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear 9 leaf spring.
Not included: bushings.








