Overview
The Icon Suspension K42000 is an Excursion 2-inch mini spring pack, a leaf spring lift for owners who want more tire clearance while keeping a ride close to factory. It works with stock shocks and adds no spring rate.
The pack suits owners who want a modest lift and room for 33-inch tall tires without changing the driveline or drilling for installation. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Works with stock shocks
- Adds no spring rate, for a ride close to factory
- Clears 33″ tall tires
- No change in towing capacity is stated
- No drive shaft modifications needed
- 100% bolt-on, with no drilling, cutting or welding for install
- Icon Suspension offers a lifetime guarantee that the leaf springs will not sag.
- Made in USA
Lift and tire clearance
A leaf spring lift raises the body over the axles, which gives room for taller tires without changing the axle geometry. Clearance is usually limited by the front fender, the inner fender and the steering components, so the tire size that fits depends on the rest of the truck as well as the lift. Tall tires also change gearing and speedometer reading, which is worth considering before the first trip.
Lift packs are usually paired with a few related parts. Brake lines and steering linkage may need to be checked for stretch, and bump stops should be inspected to keep the tire from hitting the body on hard compression. Off-road use puts extra stress on shackles and bushings, so look for wear in those areas after rough trails.
- Check brake lines and steering linkage after the lift
- Inspect bump stops for wear
- Look over shackles and bushings after off-road use
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | K42000 |
| UPC | 700006859281 |
| Lift height | 2″ |
| Tire clearance | Up to 33″ tall tires |
| Spring rate | No added spring rate (factory-like ride) |
| Towing capacity | No change stated |
| Drive shaft | No modifications needed |
| Country of manufacture | USA |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the application against your leaf spring setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a bolt-on system, with no drilling, cutting or welding and no drive shaft modifications. After installation, have the front-end alignment checked, since a change to the springs can alter ride height and alignment.
What’s included
Check the box contents against your installation before starting. Stock shocks are used with this system.
Not included: The system works with the stock shocks already on the vehicle.





