Overview
The Omix-ADA 18202.05 is a rear replacement 5-leaf spring for the Jeep CJ5 and Willys CJ-5, designed as a direct OE replacement matching the original Jeep specifications. It is a single spring stack for the rear position, so buyers replacing both rear springs need to order two.
It fits 1959–1960 and 1966–1975 Jeep CJ5 models in Base and Renegade trims, and 1955–1958 Jeep Willys CJ-5 vehicles. It is a stock-height direct fit, and Omix-ADA backs it with a five-year limited warranty.
Key features
- Rear position, 5-leaf stack
- Direct OE replacement design at stock height
- Sold as a single spring; bushings not included
- Five-year limited manufacturer warranty
Replacing rear springs in pairs
Rear springs age together, so replacing both sides at once keeps ride height and handling even. A single new spring beside an old, sagging one will sit at a different height and can pull the vehicle to one side. Plan to buy and install a matched pair in the same session.
Bushings are usually the first thing to fail in a rear leaf spring. Inspect the eye and shackle bushings for cracks, and check the spring pins for wear. Reusing the old set is possible only if it is in good shape. Support the axle on stands, and keep hands clear of the spring when it is loose, since spring tension can release suddenly.
After installation, check the U-bolts for tightness and recheck them after the first few drives. A quick look at the shock absorbers helps too, since they work with the springs to control the ride.
- Replace both rear springs together
- Inspect eye and shackle bushings
- Recheck U-bolts after initial drives
- Support the axle before removing the old spring
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18202.05 |
| UPC | 804314006983 |
| Position | Rear |
| Leaf count | 5 leaves |
| Spring quantity | Single spring |
| Bushings included | No |
| Lift height range | Stock height, direct replacement |
| Fitment type | Direct fit |
Vehicle fitment
It fits these vehicles:
- 1959–1960 and 1966–1975 Jeep CJ5 (Base, Renegade)
- 1955–1958 Jeep Willys CJ-5
It does not fit the 1976–1986 Jeep CJ7 or the 1981–1985 Jeep Scrambler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushings are not supplied, so plan to reuse the old set or source new ones before installing. Replace both rear springs together to keep ride height even from side to side. Support the vehicle on stands and keep clear of the spring while it is loose, since a spring under load can release suddenly.
What’s included
One rear leaf spring stack.
Not included: Bushings and the spring for the opposite side.






