Overview
The Rancho RS44020 is a 2.5 inch front leaf spring for Jeep Willys and early CJ models from 1942 to 1963. It is sold individually, two are required, and rubber bushings come with each spring. The listed lift height range is 0 to 4.99 inches.
Key features
- Leaf ends trimmed to cut friction and spread stress
- Individual leaves shot-peened for longer fatigue life
- Springs preset to limit settling
- Front position, single spring per unit
Leaf spring basics
A leaf spring supports the front axle and sets ride height, so replacing one changes how the front end sits and how the axle angles under load. Springs of different heights can also change steering geometry and driveline angles. Plan to check alignment after any spring change, and confirm the shocks have enough length for the new height.
Front springs on older Jeep and Willys vehicles are often replaced as a pair. Mixed spring heights can make the vehicle sit unevenly and wear components on one side faster. Inspect shackles, bushings and bump stops during the same job, since worn parts affect how the new spring performs.
- Replace front springs as a pair
- Check shackles and bushings during installation
- Review shock length after a height change
- Schedule an alignment after installation
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS44020 |
| UPC | 39703440202 |
| Lift | 2.5 inch |
| Lift height range | 0 to 4.99 inches |
| Position | Front |
| Spring quantity | Single spring |
| Bushings | Rubber bushings included |
| Quantity required | Two |
Vehicle fitment
It fits 1942 to 1963 Willys and Jeep models, including the MB, CJ-2, CJ-3, CJ-5, CJ-6, FJ and Jeepster, with the CJ3 covered for 1959 to 1963.
The list does not include the 1959 to 1975 CJ5 or CJ7 models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two springs are required, so both sides need replacing. Lift changes affect alignment and driveline angles, so have the vehicle aligned and check driveline angles after installation.
What’s included
Rubber bushings are included with the spring.
Not included: the second spring, which is sold individually.








