Leveling kit vs lift kit explained: factory rake, spacers and torsion keys, tire sizes at 2 to 3 inches, CV angles, towing, load leveling…
Lift Kits
Showing 1669–1680 of 1736 resultsSorted by popularity
-
Lift Kits
Rubicon Express 2.5 Inch Standard Coil Lift Kit with Fox Performance Resi Shocks – RE7121FPR
Lift KitsRubicon Express 2.5 Inch Standard Coil Lift Kit with Fox Performance Resi Shocks – RE7121FPR
- 2.5-inch standard coil lift with replacement front and rear coil springs
- Includes Fox Performance Resi shocks
- Rear track bar bracket, bump stops and extended sway bar end links
- Maximum tire size 35 inch x 12.50
- Covers 2007-2018 Jeep Wrangler (JK) suspension systems
SKU: R/ERE7121FPR -
Lift Kits
Rubicon Express 4.5 Inch Extreme Duty Radius Front/Rear 4-Link Long Arm Lift Kit with Mono-Tube Shocks – JKR444M
Lift KitsRubicon Express 4.5 Inch Extreme Duty Radius Front/Rear 4-Link Long Arm Lift Kit with Mono-Tube Shocks – JKR444M
- 4.5-inch lift with a radius front and 4-link rear long arm system
- Includes Mono-Tube shocks
- Adjustable chromoly upper and lower control arms with Super-Flex ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- No model years listed; confirm fitment before ordering
SKU: R/EJKR444M -
Lift Kits
Rubicon Express 4.5 Inch Extreme Duty Radius Front/Rear 4-Link Long Arm Lift Kit – No Shocks – JKR424M
Lift KitsRubicon Express 4.5 Inch Extreme Duty Radius Front/Rear 4-Link Long Arm Lift Kit – No Shocks – JKR424M
- 4.5-inch lift with a radius front and 4-link rear long arm system
- Adjustable chromoly control arms with Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- Designed for installation without welding
- No shocks included; confirm fitment before ordering
SKU: R/EJKR424M -
Lift Kits
Rubicon Express 3.5 Inch Progressive Coil Extreme Duty 4-Link Long Arm Lift Kit – JK4443P
- 3.5-inch lift using progressive coil springs and a 4-link long arm system
- Chromoly upper and lower control arms, adjustable, with Super-Flex ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- Designed to install without welding
- Shocks not included; confirm fit before ordering
SKU: R/EJK4443P -
Lift Kits
Rubicon Express 3.5 Inch Progressive Coil Extreme Duty 4-Link Long Arm Lift Kit – JK4423P
- 3.5-inch lift with a 4-link long arm system and progressive coil springs
- Adjustable chromoly upper and lower control arms with Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- No welding required for installation, per the manufacturer
- Shocks not included; confirm fit by year, model and trim
SKU: R/EJK4423P -
Lift Kits
Rubicon Express 3.5 Inch Super-Ride Short Arm Lift Kit with Rear Leaf Springs and Twin Tube Shocks – RE6025T
Lift KitsRubicon Express 3.5 Inch Super-Ride Short Arm Lift Kit with Rear Leaf Springs and Twin Tube Shocks – RE6025T
- 3.5-inch Super-Ride short arm lift kit for the Jeep Cherokee XJ
- Includes rear leaf springs, twin tube shocks and Super-Ride lower control arms
- Extended front sway bar links, stainless steel rear brake line, U-bolts
- Part number RE6025T, Rubicon Express Advantage lifetime warranty
SKU: R/ERE6025T -
Lift Kits
Rubicon Express 3.5 Inch Super-Ride Suspension Lift Kit with Shocks – RE6026T
- Rubicon Express RE6026T 3.5 inch Super-Ride lift kit with twin tube shocks
- Fits 1984–2001 Jeep Cherokee (XJ) models
- Replacement Super-Ride lower control arms in place of the factory arms
- Lift height range 2.5 to 3.5 inches
SKU: R/ERE6026T -
Lift Kits
Rubicon Express 3.5 Inch Extreme Duty Radius Front/Rear 4-Link Long Arm Lift Kit with Mono-Tube Shocks – JKR443M
Lift KitsRubicon Express 3.5 Inch Extreme Duty Radius Front/Rear 4-Link Long Arm Lift Kit with Mono-Tube Shocks – JKR443M
- 3.5-inch lift from a radius front and 4-link rear long arm system
- Extreme-duty chromoly upper and lower control arms with adjustable settings
- Super-Flex spherical ball joints and PT-Meg Super-Ride bushings
- Full-width transmission crossmember; installs without welding
- Confirm fit for your vehicle’s year, model and trim before ordering
SKU: R/EJKR443M -
Lift Kits
Rubicon Express 3.5 Inch Super-Flex Short Arm Lift Kit with Rear Leaf Springs – No Shocks – RE6030
Lift KitsRubicon Express 3.5 Inch Super-Flex Short Arm Lift Kit with Rear Leaf Springs – No Shocks – RE6030
- 3.5-inch Super-Flex short arm lift kit for the Jeep Cherokee XJ
- Includes rear leaf springs, front coil springs, Super-Flex front control arms
- Stock upper control arms retained; shocks not included
- Part number RE6030, 3 to 4.99-inch lift range
SKU: R/ERE6030 -
Lift Kits
Rubicon Express 4.5 Inch Extreme Duty 4-LINK Long Arm Lift Kit – JK4424
- 4.5-inch lift from an extreme-duty 4-link long arm system
- Adjustable chromoly upper and lower control arms with Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings and a full-width transmission crossmember
- Installs without welding; shocks not included
- No model years listed, so confirm fitment before ordering
SKU: R/EJK4424 -
-
Lift Kits
Rubicon Express 3.5 Inch Extreme Duty 4-Link Front/Rear Radius Long Arm Lift Kit with Mono-Tube Shocks – JKR423M
Lift KitsRubicon Express 3.5 Inch Extreme Duty 4-Link Front/Rear Radius Long Arm Lift Kit with Mono-Tube Shocks – JKR423M
- 3.5 inch 4-link front and radius rear extreme duty long arm kit with monotube shocks, JKR423M
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints and PT-MEG Super-Ride bushings
- Full width transmission crossmember
- No welding for installation
SKU: R/EJKR423M
What a lift kit includes
A lift kit is a bundle of parts that raises the body or frame relative to the axles. Listings in this category show how much the contents vary. Some kits are little more than spacers and bump stops, while others add replacement coil springs, extended sway bar links, track bar brackets, steering drop components and matched shocks.
Lift height is the headline number, but it is only part of the story. A kit sold as 3.5 inch, 4 inch or 6 inch describes nominal lift, and the actual change depends on the vehicle, tire size and how much it sags with weight.
Short arm, long arm and spacer designs
Design matters more than height. Common types you will see here:
- Spacer and strut kits raise the ride height cheaply and keep factory geometry, which suits moderate lifts.
- Short arm kits keep the factory control arm mounting points and replace springs, arms and shocks. They are simple to install and work well for daily drivers.
- Long arm and 4-link kits relocate the arm mounts with crossmembers, giving better articulation and a flatter arm angle at the cost of more complex installation.
- Radius arm and drop bracket kits are common on solid-axle trucks and corrected geometry varies by model.
Kits with a stage or number in the name usually add components step by step, so read the contents list rather than assuming two kits of the same height are equivalent.
Shocks and geometry correction
Raising a vehicle changes control arm angles, driveline angles and steering geometry. Good kits include correction parts such as caster-correcting bushings, cam bolts for pinion angle, drop brackets, a high steer or drag link, and extended brake lines. If a kit leaves these out, plan to buy them separately.
Shocks are either included or sold separately. Twin tube, monotube and reservoir shocks differ in heat handling and ride feel. Confirm the shock lengths suit the lift height, since a shock that is too short can limit travel and one that is too long can bottom the bump stops.
Installation and compatibility
Lift kits are vehicle specific. Confirm fitment for your exact year, make, model, cab or door configuration, drivetrain (2WD or 4WD) and engine, then compare against the manufacturer's specifications. Part numbers often change between model years.
Suspension, steering and brake line work is safety critical. Professional installation is a sound choice unless you have the tools and experience, and every fastener should be tightened to the specified torque with the vehicle at ride height. Plan on an alignment after the lift, plus a check of headlight aim, speedometer calibration if you change tire size, and driveshaft angles.
Lift height, bumper height and tire rules vary by state, so check local regulations.
Maintenance and common mistakes
A lifted suspension needs more attention than a stock one. Recheck every suspension bolt after the first 100 miles or so, because bushings settle and fasteners can lose torque. Grease any fittings on control arms and ball joints on the schedule the manufacturer gives, and inspect bump stops, shock mounts and brake lines at each oil change.
- Do not pick a lift height first and shop for parts second. Start with the tire size you want and the use you have in mind.
- Do not skip extended brake lines or a driveshaft check on taller lifts.
- Do not mix leftover parts from different kits, since spring rates and arm lengths are matched within a kit.
- Remember that a taller vehicle behaves differently in corners and in emergency maneuvers, so adjust your driving.
Related guides
- Leveling Kit vs Lift Kit: What 3 Inches Really Gets You
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Lift Kits brands
- Pro Comp Suspension (613)
- Rubicon Express (338)
- Fabtech (162)
- Rough Country (98)
- Tuff Country (90)
- Skyjacker (80)
- TeraFlex (64)
- Daystar (62)
- ReadyLift (59)
- Trail Master (40)
- Genuine Packages (26)
- ARB 4x4 Accessories (24)
Lift Kits FAQ
How much lift do I need for 35 inch tires?
It depends on the vehicle, backspacing and trimming. Many solid-axle vehicles clear 35s with about 3.5 to 4 inches of lift plus some trimming, while independent front suspension trucks vary. Check the kit manufacturer's tire size guidance for your exact model.
Do I need an alignment after installing a lift kit?
Yes. Changing ride height alters caster, camber and toe, so an alignment is required after installation. Headlight aim and driveline angles should also be checked, and a high steer or geometry correction parts may be needed.
Is a long arm kit better than a short arm kit?
Long arm kits generally improve articulation and geometry at taller lifts but cost more and are harder to install. Short arm kits are simpler and fine for moderate lifts and mostly street use.
Will a lift kit affect my ride and fuel economy?
Usually yes. A taller, heavier setup raises the center of gravity and increases drag, and bigger tires add weight and rolling resistance. Quality shocks and correct alignment help the ride but cannot fully offset those changes.





