Overview
The Rubicon Express JKR424M is a 4.5-inch lift kit that uses a radius front and 4-link rear long arm layout. It is offered without shocks, which is the main difference from the Mono-Tube version in the same range. The kit is part of Rubicon Express’s JK suspension line and is built around adjustable chromoly upper and lower control arms with Super-Flex spherical ball joints.
The radius and 4-link design is intended to provide control without limiting articulation, and the PT-Meg Super-Ride bushings are part of that setup. The full-width transmission crossmember stiffens the chassis and supports the install. Check your vehicle before ordering.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Radius front and 4-link rear long arm system
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Installs without welding
- Optional belly pan and CNC-machined steering knuckle
Radius and 4-link geometry
A radius front and 4-link rear change how the axles locate, which affects pinion angle, steering geometry and how the wheels travel through articulation. Radius arms resist braking and acceleration forces without relying on leaf springs, which is one reason the layout appeals to owners who drive rough trails. The arms need to be installed square, since small errors show up as vibration or uneven tire wear.
Before choosing this kit, decide whether the vehicle will mostly see trail use or daily driving, because arm angles affect highway comfort. Plan the alignment and driveline check at the end of the job rather than skipping it. Keep a record of the torque values and any shims used so future service is straightforward.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JKR424M |
| UPC | 70000651268 |
| System type | Extreme-duty radius front and 4-link rear long arm lift |
| Lift height | 4.5 inches (manufacturer range 3 to 4.99 inches) |
| Front arm type | Radius arm or radius arm brackets |
| Control arms | Chromoly upper and lower, adjustable |
| Joints | Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Shocks | Not included |
| Made in | USA |
Vehicle fitment
Fit depends on your year, model and trim, so verify those before buying. This kit is sold without shocks and belongs to the JK suspension line.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The radius arms and 4-link rear change how the axles locate, which affects pinion angle and driveline angles. An alignment and a driveline angle check should be part of the work after installation, and the steering should be checked for proper geometry.
What’s included
The included parts are the radius front and 4-link rear long arm components, chromoly control arms, Super-Flex spherical ball joints, PT-Meg Super-Ride bushings and the full-width transmission crossmember. Shocks are not included.
Not included: shock absorbers. The title specifies no shocks, so a separate set is needed to finish the suspension.
