Overview
The Rubicon Express JK4423P is a 3.5-inch lift kit with a 4-link long arm suspension and progressive coil springs, offered in Rubicon Express’s JK suspension range. The kit is built around adjustable chromoly upper and lower control arms that carry Super-Flex spherical ball joints and PT-Meg Super-Ride bushings, and a full-width transmission crossmember adds frame stiffness where the drivetrain mounts.
The progressive coil springs are the main spring feature of this version. The kit does not include shock absorbers, so existing shocks can be reused or a separate set added. The system installs without welding and can be upgraded with an optional belly pan and a CNC-machined steering knuckle. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- 3.5-inch lift height, within the 3 to 4.99-inch range
- 4-link long arm system with a progressive coil spring rear lift component
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Installs without welding
- Optional belly pan and CNC-machined steering knuckle
Choosing shocks for progressive springs
Progressive coil springs change their rate as they compress, so the ride is usually softer over small bumps and firmer when the suspension is loaded. That makes them a reasonable match for a vehicle driven on pavement and on trails. Because the springs are only part of the suspension, the shocks should be chosen with the springs in mind.
Existing shocks can often be reused if they are in good condition, but worn units tend to lose damping and can make a new spring feel loose. Look for leaks, cracked bushings and loose mounts before reinstalling. Replacing shocks at the same time as the springs is a common way to keep the ride balanced.
After installation, have the alignment and driveline angles checked and re-tighten fasteners after the first few drives.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4423P |
| UPC | 700008140161 |
| System type | Extreme-duty 4-link long arm with progressive coils |
| Lift height | 3.5 inches (manufacturer range 3 to 4.99 inches) |
| Spring type | Progressive coil |
| Control arms | Chromoly upper and lower, adjustable |
| Joints | Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Transmission crossmember | Full width |
| Shocks | Not included |
Vehicle fitment
It belongs to the JK suspension range. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the factory suspension with a 4-link long arm layout changes control arm angles and pinion geometry. Have the alignment and driveline angles checked after the kit is installed, since the arm geometry is different from the factory setup.
What’s included
The named parts are the adjustable upper and lower control arms, the progressive coil springs, the Super-Flex spherical ball joints, the PT-Meg Super-Ride bushings and the full-width transmission crossmember.
Not included: shock absorbers. The belly pan and steering knuckle are optional upgrades rather than part of this kit.
