Offroad Racing Fog & Driving Lights
Showing 241–252 of 537 resultsSorted by popularity
-
Driving Lights
ARB Intensity V2 32 LED Flood Light – AR32FV2
- ARB Intensity V2 32 LED flood light, part number ARBAR32FV2
- 165 watts and 20000 lumens listed; round, surface mounted, clear lens, sold as a single light
- Flood beam for width; universal fit with surface mounting
- Polycarbonate lens and LED source with no warm-up time
SKU: ARBAR32FV2 -
Driving Lights
ARB Intensity V2 21 LED Spot Light – AR21SV2
- ARB Intensity V2 21 LED spot light, part number ARBAR21SV2
- 105 watts and 13170 lumens listed; round, surface mounted, sold as a single light
- Spot beam for distance, with a polycarbonate lens and LED light source
- Universal fit; Intensity V2 optics with HyperSpot technology
SKU: ARBAR21SV2 -
Driving Lights
ARB Intensity V2 21 LED Flood Light – AR21FV2
- ARB Intensity V2 21 LED flood light, part number ARBAR21FV2
- 105 watts and 13170 lumens listed; round, surface mounted, sold as a single light
- Flood beam for width, with a polycarbonate lens and LED light source
- Universal fit, made in the United States from Australian engineering
SKU: ARBAR21FV2 -
Driving Lights
ARB Intensity Solis Flood LED Driving Light – SJB36F
- ARB Intensity Solis 36 flood LED driving light, part number ARBSJB36F
- 9 inch round housing with 165 watts and 9546 lumens
- Surface mounted, sold as a single light; universal fit
- Five-stage dimmability and interchangeable red and black die-cast bezels
SKU: ARBSJB36F -
Driving Lights
ARB Intensity Solis 21 Spot/Flood Light Kit – SJB21SFKIT
- ARB Intensity Solis 21 spot and flood light kit, part number SJB21SFKIT
- Kit provides the wiring loom for a spot and flood pair of Solis 21 lights
- Universal fit; suits the 6 5W and 15 4W LED layout of the Solis 21 range
- Digital touchpad dimming and interchangeable red and black bezels on the lights
SKU: ARBSJB21SFKIT -
Driving Lights
ARB Intensity Solis 21 Spot Driving Light – SJB21S
- ARB Intensity Solis 21 spot driving light, sold as a single unit, part number ARBSJB21S
- Surface mounted 7 inch housing with 21 LEDs for long-distance spot lighting
- Digital touchpad dimming and pre-programmed brightness settings
- Fits universally; red or black bezels and LINX integration are optional
SKU: ARBSJB21S -
Driving Lights
ARB Intensity Solis 21 Flood Driving Light – SJB21F
- ARB Intensity Solis 21 flood driving light, sold as a single unit, part number ARBSJB21F
- Compact 7 inch diameter housing with 21 LEDs for long-distance flood lighting
- Digital touchpad dimming with pre-programmed brightness settings
- Fits universally; red or black bezels and LINX integration are optional
SKU: ARBSJB21F -
Driving Lights
ARB AR32 V2 Intensity LED Spot Driving Light – AR32SV2
- ARB AR32 V2 Intensity LED spot driving light, single unit, 165 watts
- Universal fit; round, clear lens with a 6 degree spot beam
- Effective output 7450 lumens; color temperature 5700 K
- Submersible to 10 ft; amp draw 11.5 amps; surface mounting
SKU: ARBAR32SV2 -
-
Offroad Light Packages
4 Wheel Parts Factory Bronco A-Pillar Light Mount Kit – 52900BS
- A-pillar mounts for auxiliary lights on 2021–2026 Ford Bronco
- Sold as a set of two mounts
- Billet aluminum construction
- Mounts directly to the mirror mounts
- Works with most manufacturers’ aftermarket lights
SKU: 4WP52900BS
Light types and what they do
Auxiliary lights are not interchangeable. Driving lights throw a focused beam far down the road. Fog lights are mounted low and use a wide, flat pattern to light the ground close to the vehicle without bouncing glare off dust, rain or snow. Light pods are compact cubes that suit bumpers-bumpers-tire-carriers-winch-mounts-2, A-pillars and rock lighting. Light bars deliver a lot of output across a long, narrow housing and are common on roofs and bumpers.
Beam pattern and lens color
- Spot: Narrow and long reaching, good for high-speed travel.
- Flood: Wide and short, good for slow trail work and camp tasks.
- Combo: Mixes both patterns in one light for general use.
- Driving/fog patterns: Engineered for specific cutoffs and mounting heights.
Amber or yellow lenses cut glare in dust, fog and snow, while clear or white lenses give the most natural color rendering. Some listings include a colored backlight, which is decorative and does not change the main beam.
Specifications worth comparing
Lumens and watts are easy to advertise but do not tell the whole story, because optics control where the light goes. Look at the beam pattern, housing material, lens material and ingress protection rating for dust and water. Check the operating voltage, current draw and whether the light includes a harness, relay and switch. Heat sinking matters for LEDs, so look for solid metal housings rather than thin shells.
Wiring and installation
High-output lights should be wired through a relay with a properly sized fuse and wire gauge, not directly off a factory switch. Seal connections and route wiring away from heat and moving parts. Aim lights so they do not blind oncoming drivers, and cover them on public roads where required.
Legal and fitment notes
Lighting rules differ by state, and many off-road lights are intended for off-highway use only. Check local regulations before using them on paved roads. Fitment is listed as universal on many products, but mounting brackets, grille cutouts and bumper tabs vary, so confirm fitment for your exact year, make and model and read the manufacturer's specifications.
Keep the lenses clean and check that the mounting hardware stays tight, since washboard roads loosen bolts over time. Mud and dust cut output sharply, so a quick wipe before a night run is worthwhile. If a light flickers, inspect the connector seals and ground point first, because poor grounds cause most intermittent faults.
A few pairing ideas help when planning a lighting setup. A bumper-mounted pair of fog or driving lights covers close and mid range, while a roof or windshield bar adds long-range reach. Keep switches labeled and place a master switch within reach, so every light can be turned off quickly when meeting traffic. Using separate switches for spot and flood patterns lets you change the light to suit the terrain, and a dash indicator confirms what is on. Check that the combined current draw stays within the alternator's spare capacity and the circuit fuse rating, particularly if you also run a winch and a compressor.
When comparing similar-looking lights, confirm that the lens is polycarbonate or tempered glass, that the housing carries a rating for dust and immersion, and that mounting brackets are included. Heavy lights on thin brackets vibrate and can crack mounts.
Popular Offroad Racing Fog & Driving Lights brands
- Rigid Industries (249)
- Baja Designs (59)
- KC HiLites (57)
- Oracle Lighting (23)
- Hella (22)
- Pro Comp Suspension (21)
- Rough Country (20)
- ARB 4x4 Accessories (14)
- DV8 Offroad (13)
- JW Speaker (13)
- Piaa Lighting (12)
- Smittybilt (12)
Shop Offroad Racing Fog & Driving Lights by type
- Light Bars (195)
- Fog Lights (62)
- Light Pods (50)
- Driving Lights (37)
- Offroad Auxiliary Lights (27)
- Offroad Light Packages (19)
- Grille LED Light Kits (15)
- Offroad Light Wiring and Switches (9)
Offroad Racing Fog & Driving Lights FAQ
What is the difference between fog lights and driving lights?
Fog lights use a wide, low pattern that lights the ground near the vehicle and limits glare in dust or rain. Driving lights project a longer, narrower beam to see farther at speed. Many drivers run both.
Are LED off-road lights street legal?
It depends on the light and where you drive. Many off-road lights are labeled for off-highway use only, and rules differ by state. Check local regulations and the manufacturer's notes, and cover lights on public roads if required.
Do I need a relay to install a light bar?
In most cases yes. A relay lets the switch control the circuit without carrying the full current, and a fuse near the battery protects the wiring. Follow the wiring kit instructions and use wire sized for the light's current draw.
Should I choose spot, flood or combo beams?
Spot beams reach farthest and suit fast open roads, flood beams spread light for slow trails and camp use, and combo beams split the difference. Many setups pair a spot bar up high with floods or fog lights low.











