Overview
The ARB Intensity Solis 21 Spot/Flood Light Kit, part number SJB21SFKIT, is universal fit and sold as a kit. It contains the wiring needed to install spot and flood loom wiring for ARB Intensity Solis 21 lights.
The kit does not include the lights themselves, so it is the wiring side of a spot and flood setup. The Solis 21 lights it is made for have 21 LEDs, made up of 15 4W and 6 5W units, with a refined color temperature that reduces eye strain and driver fatigue.
The spot and flood pairing supports a wide range of low-light and long-distance driving on a 4WD. The Solis 21 lights have a digitally controlled touchpad and interchangeable red and black bezels.
Key features
- Wiring kit for spot and flood Solis 21 lights
- Designed for the Intensity Solis 21 light series
- Pairing a spot and flood light for distance and width
- Digital touchpad control on the Solis 21 lights
- Interchangeable red and black bezels on the Solis 21 lights
Wiring a spot and flood pair
Two lights on one circuit draw more current than either alone, so the loom and fuse need to match the combined load. Route the cable through the bar or behind the grille with grommets at every pass-through, and keep it away from exhaust heat and moving suspension parts. A clean, short run to a fused source reduces voltage drop at the lights.
The controls for a spot and flood pair are usually run together. Decide early whether both lights switch on one circuit or separately, since that decides the wiring layout. Label each lead before cutting or crimping, and test the lights on the bench before the loom goes into the vehicle.
- Confirm the fuse rating matches the combined load
- Use grommets wherever the loom passes through metal
- Test both lights before final mounting
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | SJB21SFKIT |
| Light series | Intensity Solis 21 |
| Beam pattern | Spot and flood |
| Sold as | Kit |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and is not sized for a specific vehicle. Check how the wiring connects to your power source and controls before installing.
Installation notes
Because the kit is wiring, the installation is mostly about routing the loom to a fused source and to the controls. Driving lights need a fused relay, and local rules on driving lights should be checked before the lights are used on public roads.
What’s included
The kit includes the Spot/Flood Loom wiring needed to install the Intensity Solis 21 spot and flood lights.
Not included: The lights are not part of the kit and must be bought separately.















