Overview
The ARB AR32 V2 Intensity LED spot driving light is a round, clear-lens LED driving light with a 6 degree spot beam, rated at 165 watts. It is sold as a single light and is universal fit. It is the spot version of the Intensity V2 range, engineered in Australia and made in the United States.
LEDs are an alternative to HID lights because they do not need time to warm up. The Intensity spot configuration uses HyperSpot optics to focus the beam, and the light produces a color close to natural sunlight at 5700 K. Effective output is 7450 lumens, with a rated lumen figure of 20000.
The Intensity range is vibration tested to military specifications and suits long periods on corrugated roads. Pairing the spot with a flood light gives long-range and shoulder-to-shoulder visibility.
Key features
- LED light source with a listed 165 watt rating
- 6 degree horizontal spot beam with HyperSpot optics
- Round housing with a clear lens
- Polycarbonate lens, which ARB describes as virtually indestructible
- Submersible to 10 ft and compliant for radio interference suppression
- Vibration tested to military specifications.
- Intensity V2 chassis with updated LED technology
Choosing spot or flood
Spot and flood patterns do different jobs, so the choice depends on where the light will be used. A spot pattern throws light far down the trail, which helps with long sightlines on open tracks. A flood spreads light wide across the near ground, which helps at walking pace and on tight turns.
Many drivers pair a spot light with a flood light so each covers a different distance. Mounting height and angle affect the result more than the light itself, so aim each unit before using it at speed. Surface mounts sit closer to the body and are easier to reach for cleaning.
Mounting should keep the lens clear of mud and brush, and the bracket should be solid enough to hold the light through rough terrain. Vibration is a constant factor off road, so check fasteners and brackets after each trip. Keep the wiring routed away from hot or moving parts.
- Aim the spot beam ahead of the vehicle
- Keep the lens free of mud and brush
- Check mounting bolts after rough trips
- Route wiring away from heat and moving parts
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARBAR32SV2 |
| Light series | Intensity V2 |
| Type | Driving light, spot beam pattern |
| Bulb type | LED |
| Light shape | Round |
| Lens color | Clear |
| Watts | 165 watts |
| Effective lumens | 7450 lumens |
| Listed lumens | 20000 lumens |
| Color temperature | 5700 K |
| Horizontal beam angle | 6 degrees |
| Amp draw | 11.5 amps |
| Mounting location | Surface |
| Sold as | Single |
| Submersion depth | 10 ft |
| Fitment | Universal fit |
Vehicle fitment
This light is universal fit, so it is not sized for a specific make, model or year. Surface mounting means the mounting location on your vehicle must be able to take a surface-mounted light.
Installation notes
With an amp draw of 11.5 amps, wire the light through a fused relay rather than running it from a switch alone. Local rules on driving lights vary, so check them before fitting lights that will be used on public roads.
What’s included
The package is a single light, with a surface mounting location.
Not included: a wiring harness, switch, relay or mounting bracket.












