Overview
The ARB Intensity Solis 36 Flood LED Driving Light, part number ARBSJB36F, is a single 9 inch round LED driving light with a flood beam. It is universal fit, mounts to a surface, and is rated at 165 watts with 9546 lumens.
The Solis range is offered in a spot or flood beam, and the flood version is the one described here. It comes with interchangeable red and black die-cast side bezels, so the bezel finish can be changed on the same light.
The Solis 36 introduced five-stage dimmability to the Intensity Solis range. The single-piece reflector and 165 watts of OSRAM LED output form the basis for the light’s output.
Key features
- 9 inch round housing
- 165 watts of OSRAM LED output
- 9546 lumens listed
- Flood beam pattern
- Five-stage dimmability
- Single-piece reflector
- Interchangeable red and black die-cast side bezels
- Surface mounting location
Planning power and heat
A high-output LED light puts a steady load on the vehicle’s electrical system, so the supply cable and relay matter more than they would on a small auxiliary light. A cable that is too thin heats up and loses voltage, which can make the light dim under load. Run the supply from a fused point close to the battery where practical.
Heat comes off the housing during use, so keep it clear of anything that could melt or trap heat. Surface mounting on a bar works well when there is airflow around the body. Check the seals after water crossings and keep the lens clean so the output is not reduced by grime.
- Use a relay for the switching circuit
- Check the cable for heat marks at each service
- Keep spare bezels dry and clean
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARBSJB36F |
| Light series | Intensity Solis |
| Type | Driving light |
| Bulb type | LED |
| Light shape | Round |
| Size | 9 inch |
| Watts | 165 watts |
| Lumens | 9546 lumens |
| Beam pattern | Flood |
| Mounting location | Surface |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and is not sized for a specific vehicle. As a surface-mounted light, plan the bracket and position on the bar or body before installing.
Installation notes
A 165 watt light needs a fused relay, and its dimming function depends on the control wiring. Check local rules on driving lights before using it on public roads.
What’s included
The package is one flood light with a set of interchangeable die-cast side bezels in red and black.
Not included: wiring, a switch or a relay for the light.














