LED and halogen light bars for bumpers, roofs and grille guards, from compact 4-inch units to 50-inch curved bars. This category suits off-roaders adding forward lighting for night trail runs and work areas. Brands include Rigid Industries, Rough Country, DV8 Offroad and KC HiLites. Open a product page for size, beam pattern and part number details, then compare the products below.
Light Bars
Showing 1–12 of 195 resultsSorted by popularity
What a light bar is
A light bar is a long, narrow housing with a row or rows of LEDs behind a lens, mounted on a bumper, roof, windshield frame or grille guard. It lights a wide area ahead of the vehicle far beyond what headlights reach, which is helpful on dark trails. Sizes in this category run from 4 inches up to 50 inches, with single row and double row layouts and straight or curved housings.
Beam patterns
- **Spot.** A narrow, focused beam that throws light far down the trail. Good for speed and distance.
- **Flood.** A wide, even spread for close range, such as rock crawling or camp work.
- **Combo.** Spot and flood optics in one bar, a common all-purpose choice.
- **Driving.** An intermediate pattern that blends reach and width.
Many drivers pair a long spot bar on the roof with a flood or fog light low on the bumper.
Key specs to compare
- **Length and mounting location.** A longer bar produces more light but needs a mount that fits. Check the space on your bumper, roof rack or windshield, and the mounting hardware included.
- **Output.** Lumens ratings vary in how they are measured, so compare beam pattern and actual light spread, not only the number.
- **Ingress protection.** Look for an IP rating that shows dust and water resistance, particularly if you cross water.
- **Housing and lens.** Die-cast aluminum housings shed heat; polycarbonate lenses resist impact.
- **Power draw and wiring.** Larger bars need a relay, fused harness and a switch. Confirm the harness is included or plan for one.
- **Special features.** Halos, amber covers, RGB backlighting and daytime running light functions appear on some models.
Legal and installation notes
Off-road light bars are generally intended for off-highway use. Rules for using auxiliary lights on public roads vary by state, so check local regulations, and cover the lens when driving on pavement. Do not use a high-output bar where it could blind other drivers.
Mount the bar to solid structure with the supplied brackets, and keep it clear of airbag, sensor and radar zones. Use a fused, relayed circuit rather than pulling power through the factory wiring, and seal any connection exposed to weather. A few listings such as N-Fab items are vehicle-specific brackets and bars, so confirm fitment for your exact year, make and model before you choose.
Measure before you buy. Check the mounting width on your bumper, roof rack or windshield frame, and allow space for brackets, wiring and any cover. Make sure the bar does not sit in front of a radar sensor or camera, and check how it affects the closing of the hood.
Many drivers pair a bar with a harness and relay, a switch panel, wiring connectors that seal against moisture, and a lens cover. Common mistakes are using wire that is too thin for the amperage, mounting the bar on a thin panel that vibrates, and aiming it too high, which creates glare in dust and fog. Maintenance is light. Wash the lens with a soft cloth to avoid scratches, check the bracket bolts and connectors after rough trails, and look for water inside the housing, which may mean a failed seal.
Popular Light Bars brands
- Rigid Industries (96)
- Hella (14)
- Rough Country (13)
- DV8 Offroad (11)
- KC HiLites (10)
- Smittybilt (10)
- Pro Comp Suspension (10)
- Westin (9)
- Nfab (9)
- Baja Designs (7)
- Rugged Ridge (6)
- Body Armor 4x4 (5)
Light Bars FAQ
What is the difference between spot and flood beams?
A spot beam is narrow and concentrated, so it reaches far down the trail. A flood beam spreads wide and short for close range work. A combo bar uses both. Pick based on how fast you drive and how far ahead you need to see.
Are LED light bars street legal?
Rules vary by state, and many jurisdictions limit auxiliary lights on public roads. Most bars are made for off-highway use, and drivers commonly use a cover on pavement. Check your local regulations before wiring one for road use.
Do I need a relay for a light bar?
Usually yes. Larger bars draw enough current that they should be powered through a fused, relayed circuit with a dedicated switch, not tapped into factory wiring. Many kits include a harness; check the product details.
What size light bar should I choose?
Choose the longest bar that fits your mounting spot, such as a bumper opening or roof rack, without blocking sensors or the driver's view. Longer bars add width, while the beam pattern determines reach.











