Overview
The ARB Intensity V2 21 LED Flood Light, part number ARBAR21FV2, is a single round LED driving light with a flood beam and a surface mounting location. It comes in flood and spot versions, so the choice comes down to whether width or distance matters more on your trips. It is universal fit, rated at 105 watts with 13170 lumens.
The Intensity V2 range is engineered in Australia and manufactured in the United States. The light produces white light close to sunlight, and it uses a polycarbonate lens designed to resist impact.
LEDs need no time to warm up, unlike HID lights. A broad light field helps on corrugated roads, where the beam spreads ahead of the vehicle.
The V2 uses the same chassis design as the previous generation, with updated LED technology from OSRAM. The flood optic is updated to spread light further down the road, and a flood paired with a spot gives long-range and shoulder-to-shoulder visibility.
Key features
- Round housing with a flood beam pattern
- 105 watts and 13170 lumens listed
- Polycarbonate lens
- LED light source with no warm-up time
- Broad light field for corrugated roads
- Submersible to 10 ft and compliant for radio interference suppression
- Vibration tested to military specifications
Lens care and beam clarity
The lens is the part of the light that takes the most hits from stones and mud. A clean polycarbonate lens keeps the beam bright, so washing it after muddy trips is worth the time. Use mild soap and water, and avoid abrasive pads that leave fine scratches which scatter light at night.
Flood lights on a bar often see spray and debris, so check the seal around the lens after rough driving. Look at the bracket as well, since a loose mount lets the light drift out of its set position on corrugated roads. A flood that is aimed well spreads light across the road and into the verge without dazzling oncoming drivers.
- Wash the lens after muddy runs
- Check the seal after water crossings
- Recheck the aim after bracket work
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARBAR21FV2 |
| Light series | Intensity V2 |
| Type | Driving light |
| Bulb type | LED |
| Light shape | Round |
| Watts | 105 watts |
| Lumens | 13170 lumens |
| Beam pattern | Flood |
| Mounting location | Surface |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit and is not sized for a specific vehicle. The surface mounting location means the bracket and position on your bar or body set the final placement.
Installation notes
Wire the light through a fused relay, and check local rules on driving lights before using it on public roads. Check the bracket and lens clearance on your bar before tightening the mounting.
What’s included
The package is one flood light, sold as a single unit.
Not included: wiring, a switch, a relay or a mounting bracket.













