Offroad Racing Fog & Driving Lights
Showing 217–228 of 537 resultsSorted by popularity
-
-
Offroad Light Packages
Baja Designs S8 50″ Roof Light Bar Kit with Toggle Switch Harness – 447758
- Baja Designs S8 50 inch roof light bar kit, part number 447758
- Watts 300, lumens 31750, IP69K waterproof
- Toggle switch harness, vehicle specific brackets, no drilling
- Fitment: 2021–2026 Ford Bronco
SKU: BAJ447758 -
Offroad Light Packages
Baja Designs S8 20″ Driving Combo Bumper Light Kit – 448030
- Baja Designs S8 20 inch driving combo bumper light kit, part number 448030
- Mounts in the lower grille, no drilling or modifications
- Includes light, wiring harness and mounts
- Fitment: 2019 Ram 2500 and 3500
SKU: BAJ448030 -
-
-
Light Pods
Baja Designs S2 Pro LED Driving/Combo Flush Mount Light (Amber) – 481013
- Amber driving/combo LED light for flush mounting
- 2,150 lumens at 21 watts from a 3-inch by 2-inch housing
- IP69K waterproof and IK10 impact rated.
- Billet machined aluminum bezel with a hard-coated polycarbonate lens
SKU: BAJ481013 -
Driving Lights
Baja Designs LP9 Sport LED Driving/Combo Light (Amber) – 350013
- LP9 Sport driving combo light in amber, sold as a single light
- 9 forward LEDs at 6,500 lumens and 61 watts
- Integrated peripheral LEDs at 2,550 lumens and 24 watts
- Direct Ducted Cooling and uService lens change
- Black finish with bracket mount
SKU: BAJ350013 -
Driving Lights
Baja Designs LP6 Pro Driving Combo LED Light (Amber) – 270013
- LP6 Pro 6 inch driving combo light, amber
- 10,300 total lumens with 8,600 forward and 1,700 peripheral
- 90 watts, 6.5 amp draw, 49,930 hour LED life
- Direct ducted cooling and integrated peripheral technology
- IP69K and IK10 rated, exceeds MIL-STD810G
SKU: BAJ270013
Light types and what they do
Auxiliary lights are not interchangeable. Driving lights throw a focused beam far down the road. Fog lights are mounted low and use a wide, flat pattern to light the ground close to the vehicle without bouncing glare off dust, rain or snow. Light pods are compact cubes that suit bumpers-bumpers-tire-carriers-winch-mounts-2, A-pillars and rock lighting. Light bars deliver a lot of output across a long, narrow housing and are common on roofs and bumpers.
Beam pattern and lens color
- Spot: Narrow and long reaching, good for high-speed travel.
- Flood: Wide and short, good for slow trail work and camp tasks.
- Combo: Mixes both patterns in one light for general use.
- Driving/fog patterns: Engineered for specific cutoffs and mounting heights.
Amber or yellow lenses cut glare in dust, fog and snow, while clear or white lenses give the most natural color rendering. Some listings include a colored backlight, which is decorative and does not change the main beam.
Specifications worth comparing
Lumens and watts are easy to advertise but do not tell the whole story, because optics control where the light goes. Look at the beam pattern, housing material, lens material and ingress protection rating for dust and water. Check the operating voltage, current draw and whether the light includes a harness, relay and switch. Heat sinking matters for LEDs, so look for solid metal housings rather than thin shells.
Wiring and installation
High-output lights should be wired through a relay with a properly sized fuse and wire gauge, not directly off a factory switch. Seal connections and route wiring away from heat and moving parts. Aim lights so they do not blind oncoming drivers, and cover them on public roads where required.
Legal and fitment notes
Lighting rules differ by state, and many off-road lights are intended for off-highway use only. Check local regulations before using them on paved roads. Fitment is listed as universal on many products, but mounting brackets, grille cutouts and bumper tabs vary, so confirm fitment for your exact year, make and model and read the manufacturer's specifications.
Keep the lenses clean and check that the mounting hardware stays tight, since washboard roads loosen bolts over time. Mud and dust cut output sharply, so a quick wipe before a night run is worthwhile. If a light flickers, inspect the connector seals and ground point first, because poor grounds cause most intermittent faults.
A few pairing ideas help when planning a lighting setup. A bumper-mounted pair of fog or driving lights covers close and mid range, while a roof or windshield bar adds long-range reach. Keep switches labeled and place a master switch within reach, so every light can be turned off quickly when meeting traffic. Using separate switches for spot and flood patterns lets you change the light to suit the terrain, and a dash indicator confirms what is on. Check that the combined current draw stays within the alternator's spare capacity and the circuit fuse rating, particularly if you also run a winch and a compressor.
When comparing similar-looking lights, confirm that the lens is polycarbonate or tempered glass, that the housing carries a rating for dust and immersion, and that mounting brackets are included. Heavy lights on thin brackets vibrate and can crack mounts.
Popular Offroad Racing Fog & Driving Lights brands
- Rigid Industries (249)
- Baja Designs (59)
- KC HiLites (57)
- Oracle Lighting (23)
- Hella (22)
- Pro Comp Suspension (21)
- Rough Country (20)
- ARB 4x4 Accessories (14)
- DV8 Offroad (13)
- JW Speaker (13)
- Piaa Lighting (12)
- Smittybilt (12)
Shop Offroad Racing Fog & Driving Lights by type
- Light Bars (195)
- Fog Lights (62)
- Light Pods (50)
- Driving Lights (37)
- Offroad Auxiliary Lights (27)
- Offroad Light Packages (19)
- Grille LED Light Kits (15)
- Offroad Light Wiring and Switches (9)
Offroad Racing Fog & Driving Lights FAQ
What is the difference between fog lights and driving lights?
Fog lights use a wide, low pattern that lights the ground near the vehicle and limits glare in dust or rain. Driving lights project a longer, narrower beam to see farther at speed. Many drivers run both.
Are LED off-road lights street legal?
It depends on the light and where you drive. Many off-road lights are labeled for off-highway use only, and rules differ by state. Check local regulations and the manufacturer's notes, and cover lights on public roads if required.
Do I need a relay to install a light bar?
In most cases yes. A relay lets the switch control the circuit without carrying the full current, and a fuse near the battery protects the wiring. Follow the wiring kit instructions and use wire sized for the light's current draw.
Should I choose spot, flood or combo beams?
Spot beams reach farthest and suit fast open roads, flood beams spread light for slow trails and camp use, and combo beams split the difference. Many setups pair a spot bar up high with floods or fog lights low.











