Performance Axle Components
Showing 481–492 of 669 resultsSorted by popularity
-
-
Axle Upgrade Kits
Alloy USA Ford Differential Cable Lock Kit By Alloy USA – 450750
- Ford differential cable lock kit with positive manual engagement
- Not vacuum dependent; for vehicles with a front locker
- Fits 1997–2003 Ford F-150 and 2004 F-150 Heritage
- Allows 2WD low range control from inside the vehicle
SKU: ALY450750 -
Ring and Pinion Installation Kits
Alloy USA Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 352053
Ring and Pinion Installation KitsAlloy USA Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 352053
- Alloy USA 352053 Dana 44 JK non-Rubicon rear master ring and pinion kit
- Built for 2007-2018 Jeep Wrangler JK non-Rubicon rear axles
- Bearings and seals included
- Part number 352053, UPC 801773044860
SKU: ALY352053 -
Ring and Pinion Installation Kits
Alloy USA Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 352052
Ring and Pinion Installation KitsAlloy USA Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 352052
- Alloy USA 352052 Dana 44 JK Rubicon rear master ring and pinion installation kit
- Built for 2007-2018 Jeep Wrangler JK Rubicon rear axles
- Bearings and seals included
- Part number 352052, UPC 70000531045
SKU: ALY352052 -
Ring and Pinion Installation Kits
Alloy USA Dana 30 JK Master Ring and Pinion Installation Kit – 352050
Ring and Pinion Installation KitsAlloy USA Dana 30 JK Master Ring and Pinion Installation Kit – 352050
- Alloy USA 352050 master ring and pinion installation kit for the Dana 30 JK axle, tied to the Jeep Wrangler JK (2007-2018)
- Includes bearings, pinion seals, pinion shims, crush sleeve, pinion nut, ring gear bolts and marking compound
- Part number 352050, UPC 801773044839
SKU: ALY352050 -
Ring and Pinion Installation Kits
Alloy USA Dana 35 Rear Master Ring and Pinion Installation Kit – 352049
Ring and Pinion Installation KitsAlloy USA Dana 35 Rear Master Ring and Pinion Installation Kit – 352049
- Ring and pinion installation kit for Dana 35 rear differentials
- Part number 352049
- Includes bearings, pinion seals, pinion shims, crush sleeve and marking compound
- No vehicle is named, so check fitment before ordering
SKU: ALY352049 -
Ring and Pinion Installation Kits
Alloy USA Dana 44 TJ Master Ring and Pinion Installation Kit – 352045
Ring and Pinion Installation KitsAlloy USA Dana 44 TJ Master Ring and Pinion Installation Kit – 352045
- Alloy USA 352045, Dana 44 TJ master ring and pinion installation kit
- Built for 1997-2006 Jeep Wrangler TJ
- Includes bearings, seals, shims and crush sleeve
- Part number 352045, UPC 70000379281
SKU: ALY352045 -
Ring and Pinion Installation Kits
Alloy USA Dana 44 Master Ring and Pinion Installation Kit – 352033
Ring and Pinion Installation KitsAlloy USA Dana 44 Master Ring and Pinion Installation Kit – 352033
- Alloy USA Dana 44 master ring and pinion installation kit, part number 352033
- Includes bearings, pinion seals, pinion shims and crush sleeve
- Ring gear bolts, pinion nut and marking compound included
- Direct fit classification; gear set not included
SKU: ALY352033 -
Ring and Pinion Installation Kits
Alloy USA Dana 30 TJ Master Ring and Pinion Installation Kit – 352031
Ring and Pinion Installation KitsAlloy USA Dana 30 TJ Master Ring and Pinion Installation Kit – 352031
- Ring and pinion installation kit for Dana 30 TJ Master differentials
- Fits 1997-2006 Jeep Wrangler TJ
- Part number 352031 with bearings, pinion seals, shims and crush sleeve
- Includes pinion nut, ring gear bolts and marking compound
SKU: ALY352031
What belongs in this category
These are the parts that live inside and around the axle housing. Ring and pinion gear sets and installation kits set the final drive ratio. Differentials, including limited-slip and locking units, control how torque is split between the wheels. Axle upgrade kits, axle housing parts, differential covers, ball joints and locking hub spindle nuts round out the group.
The sample listings mention axles such as the Dana 44, Dana 70, Chrysler 8.25 inch and Ford 9.75 inch, so identifying your axle model is the first step.
Choosing a ratio and a differential
Gear ratio should follow tire size and how the vehicle is used. Larger tires effectively raise the overall gearing, which makes the engine work harder and can hurt acceleration and towing. Regearing to a numerically higher ratio restores some of that lost performance. Front and rear ratios must match on a four-wheel-drive vehicle.
- An open differential is the stock choice and offers smooth street manners.
- A limited-slip unit shifts torque toward the wheel with traction while keeping some road manners.
- A locker forces both wheels to turn together for maximum traction on the trail, with some trade-offs in tire wear and handling on pavement.
What to verify before ordering
- Axle model, spline count, bolt pattern and carrier style, because parts differ even within one axle family.
- Tooth count and ratio of the existing gears, which determine whether you need a new matched set.
- Whether a kit includes bearings, shims, seals and hardware or only the gears.
- Front or rear position and side, as parts are often not interchangeable.
Installation notes
Setting up ring and pinion gears requires measuring pinion depth, backlash and bearing preload with the right tools. Mistakes cause noise and premature failure, so many owners leave this job to an experienced drivetrain shop. Ball joints, seals and axle shafts are more approachable but still need proper torque values and clean, correctly lubricated assemblies.
Replace gear oil after installation, follow the break-in procedure from the gear maker, and confirm fitment for your exact year, make and model against the manufacturer's specifications.
Further checks and care
Common mistakes to avoid
Mixing gear sets is a frequent error, since a ring gear and pinion are lapped and matched as a pair. Reusing old bearing races, skipping new shims or ignoring carrier spread can undo an otherwise good build. Another mistake is regearing only one axle. Before you start, gather the correct crush sleeve or shims, thread locker, gear marking compound and the specified gear oil, and keep the work area clean, since grit inside a differential shortens its life.
Measuring and confirming your axle
Beyond the ID tag, confirm the number of ring gear bolts, the carrier bearing style, the axle spline count and the housing width before ordering anything. Record the existing ratio from the tooth counts on the ring gear and pinion, or by counting driveshaft turns for one full wheel rotation. Photos of the cover shape and the axle tube diameter help when comparing against the listing. If a product mentions a specific vehicle platform, confirm it matches yours before proceeding.
Materials, construction and maintenance
Gear sets are usually made from forged alloy steel that is heat treated, and quality depends on tooth pattern accuracy and finishing. Ball joints and bearings rely on correct grease and sealing. After the first few hundred miles of use, change the gear oil to remove break-in metal, then follow the maker's interval. Check axle seals and vent hoses periodically, since a plugged vent can push fluid past seals and contaminate brakes.
Popular Performance Axle Components brands
- G2 Axle and Gear (297)
- Dana Spicer (64)
- Moog (59)
- Crown Automotive (34)
- ARB 4x4 Accessories (33)
- Trail Gear (27)
- Alloy USA (22)
- Eaton (16)
- Motive Gear (15)
- Mag-Hytec (12)
- Omix-Ada (10)
- Dynatrac (9)
Shop Performance Axle Components by type
- Ring and Pinion Installation Kits (216)
- Differential Covers (99)
- Axle Ball Joints (94)
- Axle Upgrade Kits (49)
- Differentials (40)
- Axle Housing (24)
- Hub Gears And Drive Flanges (16)
- Axle King Pin Parts (14)
- Differential Air System Line Fitting (10)
- Differential Air System Line (3)
- Differential Housing (3)
- Carrier Cross Shafts (3)
- Locking Hub Service Kits (1)
- Locking Hub O-Ring (1)
Performance Axle Components FAQ
How do I know which axle I have?
Look for a tag or ID number on the housing, check the cover shape and bolt count, and consult the vehicle's build information. Measuring the ring gear diameter can confirm it. Verify before ordering gears, because many axles look alike.
Do I have to change both front and rear gears together?
On a part-time or full-time four-wheel-drive vehicle, yes. Front and rear ratios must match so the axles turn at the same relative speed, or the driveline can bind and wear out quickly.
Can I install a ring and pinion myself?
It is possible with a dial indicator, torque wrench and the right bearing tools, but correct setup takes experience. Incorrect pinion depth or backlash causes noise and failures, so a professional drivetrain installation is often the safer route.




