Overview
The ARB replacement seal housing and O-ring kit, part number 081801SP, is for servicing an ARB differential locker. It includes a seal housing and the O-rings that go with it. The kit is matched to the locker model rather than to a vehicle.
The seal housing retains the seals around the locker’s internal mechanism, and the O-rings seal the joints where the housing meets the rest of the assembly. Lockers that are opened for service usually have these parts renewed together.
ARB says its engineers use CAD and CAM modeling and finite element analysis in design, and that the brand’s facilities combine laser cutting, CNC bending and welding with powder coating and spray painting.
Kits like this one are chosen by locker model, so match the model number on the locker against the kit before ordering or opening the package.
Key features
- Seal housing and O-ring kit
- Part number 081801SP
- Made for ARB locker service
Servicing a locker safely
A differential locker’s seal housing keeps lubricant in and contaminants out of the locker’s internal mechanism. When a locker is opened for service, the seals and O-rings around that housing are usually disturbed, so they are best renewed with the housing rather than reused. Clean mating surfaces thoroughly and check them for nicks before the new seals go in, since a small burr can cut an O-ring during assembly.
Careful handling makes the job go more smoothly. Work in a clean area, keep the kit’s parts together, and lay out each O-ring before fitting so none gets pinched. If the locker shows signs of wear, such as oil seepage at the housing or difficulty engaging, inspect the internal parts while the cover is off. Refill with the lubricant type suited to your axle and locker model.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 081801SP |
| Product type | Replacement seal housing and O-ring kit |
| Application | ARB differential locker service |
Vehicle fitment
The kit is matched to the ARB locker model, not to a vehicle. Confirm the locker model in your axle against the kit before ordering.
Installation notes
Install the seal housing and the O-rings from the same kit together. Mixing parts from different kits can leave the locker with the wrong seal, so keep the kit intact until it is fitted.
What’s included
One seal housing and the O-rings supplied with it.









