Overview
The Alloy USA Dana 44 master ring and pinion installation kit, part number 352033, supplies the bearings, seals, shims and hardware used when rebuilding a Dana 44 differential or installing a ring and pinion. The kit covers the install parts that surround the gear set.
The kit offers the components needed to complete a differential rebuild or ring and pinion installation. It includes bearings, pinion seals, pinion shims, crush sleeve, pinion nut, ring gear bolts and marking compound.
Key features
- Bearings and pinion seals included
- Pinion shims for pinion setup
- Crush sleeve and pinion nut included
- Ring gear bolts included
- Marking compound included for checking gear contact during setup
- Direct fit classification
Setting up gear contact
A ring and pinion installation kit supplies the small parts around the gear set, but the gears still need to be set correctly before the axle is closed up. Pinion depth, backlash and preload all affect how the teeth meet and how long the bearings last. Setup is a job for a shop with the right tools and experience with Dana 44 housings.
The marking compound helps show tooth contact so the setup can be adjusted before final assembly. After the gears are installed, a break-in period lets the teeth seat against each other, so drive gently at first and check for noise or heat. Keep the housing clean and the bolts torqued to the required values during assembly.
- Check tooth contact with the marking compound
- Set pinion depth before final assembly
- Confirm backlash within the required range
- Allow a break-in period after installation
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 352033 |
| UPC | 70000379279 |
| Axle type | Dana 44 |
| Fitment classification | Direct fit |
| Kit contents | Bearings, pinion seals, pinion shims, crush sleeve, pinion nut, ring gear bolts, marking compound |
Vehicle fitment
This kit is designed for Dana 44 differentials, so confirm the axle type and gear setup match your housing before use. Confirm your vehicle’s year and model before ordering.
Check your Dana 44 setup against the kit before ordering.
Installation notes
Ring and pinion work needs professional setup, including pinion depth and backlash checks, followed by a break-in period as the new gears seat. The marking compound is included for checking tooth contact during that setup.
What’s included
The kit includes bearings, pinion seals, pinion shims, crush sleeve, pinion nut, ring gear bolts and marking compound.
Not included: the ring and pinion gear set.








