Overview
The Alloy USA Dana 35 Aluminum Differential Cover (part 11211) is a red powder coated cast aluminum rear differential cover for Dana 35 axles.
Alloy USA’s Boulder covers are cast from A356-T6 aluminum for impact resistance. The cover shields the differential interior from rock strikes and off-road debris and carries heat away from the gears.
Rear covers sit low on the axle housing, so they are among the first parts to meet rocks on a steep trail. A tough cover protects the carrier and bearings and keeps the lubricant where it belongs. Alloy USA’s machined face suits either a gasket or RTV sealant, so you can choose the sealing method that suits your build.
Key features
- Impact-resistant A356-T6 cast aluminum
- Machined surface suited to gasket or RTV sealant
- Magnetic drain plug
- Specially designed dipstick bolt for fill checks
- Red powder coat
Choosing and checking the cover
A differential cover does more than keep debris out. It holds gear oil in the housing, shields the carrier and bearings from rock strikes, and gives you one access point for checking and changing the lubricant. When you pick a replacement, look at wall thickness and the mounting face as well as the finish. A flange that is nicked or uneven is a common source of seepage at the gasket, especially on axles that flex hard on steep trails.
Once the cover is on, recheck the cover bolts after the first few drives, because the gasket or sealant settles as the axle heats and cools. Inspect the cover for dents after trail runs, and keep a spare drain plug washer on hand. Checking the fill level with the dipstick bolt after the first few outings confirms that the seal is holding.
- Clean the mounting face fully before fitting a new gasket
- Use the dipstick bolt to confirm the fill level
- Inspect the drain plug magnet at every oil change
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 11211 |
| UPC | 804314293277 |
| Material | A356-T6 cast aluminum |
| Finish | Red powder coat |
| Axle location | Rear |
| Axle type | Dana 35 |
| Oil capacity | Extra |
| Drain plug | Magnetic |
| Dipstick | Specially designed dipstick bolt |
Vehicle fitment
It fits Dana 35 rear axles, so the axle type decides fit.
Match the axle type to your vehicle’s year, model and trim before you order.
What’s included
An aluminum cover with its magnetic drain plug and dipstick bolt.
Not included: Gear oil.






















