Drivetrain & Differential
Showing 901–912 of 1036 resultsSorted by popularity
-
Ring and Pinion Installation Kits
G2 Dana 35 Minor Ring and Pinion Installation Kit – 25-2049
- Minor installation kit for the Dana 35 axle
- Includes pinion nut, pinion seal, crush sleeve and shims
- Includes ring gear bolts, thread locking compound, gear marking compound and silicone sealer
- Gears and bearings not included
SKU: G/225-2049 -
Differential Housing
G2 Ford 9 Inch 3.250 Inch Bore Nodular Iron 3rd Member Case – 66-2011CN
- Heavy duty nodular iron 3rd member case for Ford 9 inch axles
- 3.250 inch carrier bearing bore for aftermarket differentials
- Support ribbing and improved pilot bearing support
- Billet steel spanner nuts, part number 66-2011CN
SKU: G/266-2011CN -
Differential Covers
G2 Chrysler 8.25 Inch Aluminum Cover Black – 40-2029ALB
- Made for Chrysler 8.25-inch rear axles
- Cast lightweight aluminum helps dissipate heat from the gear oil
- Black powder coat finish, part number 40-2029ALB
- Reinforcing ribs, heat treated and shot peened body
- Fully machined seal surface for a leak-free installation
SKU: G/240-2029ALB -
Differential Covers
G2 G2 Dana 35 G-2 Aluminum Differential Cover Black – 40-2049ALB
- Black rear cover for Dana 35 axles, part number 40-2049ALB
- Cast aluminum body helps dissipate heat from the gear oil
- Reinforcing ribs for added rigidity and strength
- Black powder coated finish
- Extra oil capacity
SKU: G/240-2049ALB -
Ring and Pinion Installation Kits
G2 Dana 30/44 YJ 4.88 Ring and Pinion Minor Installation Kit – 4-YJ2-488M
Ring and Pinion Installation KitsG2 Dana 30/44 YJ 4.88 Ring and Pinion Minor Installation Kit – 4-YJ2-488M
- For the 1987–1995 Jeep Wrangler YJ with Dana 30 front and Dana 44 rear axles
- 4.88 ring and pinion gear sets, front and rear
- Dana 30 front and Dana 44 rear axles
- Includes matched front and rear minor installation kits
- Limited lifetime warranty
SKU: G/24-YJ2-488M -
Ring and Pinion Installation Kits
G2 Dana 30/44 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ4-488M
Ring and Pinion Installation KitsG2 Dana 30/44 XJ 4.88 Ring and Pinion Minor Installation Kit – 4-XJ4-488M
- 4.88 front Dana 30 and rear Dana 44 ring and pinion kit
- Includes front and rear matched minor installation kits
- For the 1987–1990 Jeep Cherokee (XJ)
- Computer heat treated 8620 steel; limited lifetime warranty
SKU: G/24-XJ4-488M -
Ring and Pinion Installation Kits
G2 Dana 44/44 JK 4.56 Ring and Pinion Minor Installation Kit – 4-JKRUB-456M
Ring and Pinion Installation KitsG2 Dana 44/44 JK 4.56 Ring and Pinion Minor Installation Kit – 4-JKRUB-456M
- 4.56 front and rear Dana 44 ring and pinion kit
- For Rubicon Wrangler JK, 2 and 4 door
- Includes front and rear matched minor installation kits
- Computer heat treated 8620 steel; limited lifetime warranty
SKU: G/24-JKRUB-456M -
Ring and Pinion Installation Kits
G2 Dana 44/44 JK 4.88 Ring and Pinion Minor Installation Kit – 4-JKRUB-488M
Ring and Pinion Installation KitsG2 Dana 44/44 JK 4.88 Ring and Pinion Minor Installation Kit – 4-JKRUB-488M
- 4.88 front and rear Dana 44 ring and pinion kit
- For Rubicon Wrangler JK, 2 and 4 door
- Includes front and rear matched minor installation kits
- Computer heat treated 8620 steel; limited lifetime warranty
SKU: G/24-JKRUB-488M -
Ring and Pinion Installation Kits
G2 Dana 44/44 JK 5.13 Ring and Pinion Minor Installation Kit – 4-JKRUB-513M
Ring and Pinion Installation KitsG2 Dana 44/44 JK 5.13 Ring and Pinion Minor Installation Kit – 4-JKRUB-513M
- 5.13 front and rear Dana 44 ring and pinion kit
- For Rubicon Wrangler JK, 2 and 4 door
- Includes front and rear matched minor installation kits
- Computer heat treated 8620 steel; limited lifetime warranty
SKU: G/24-JKRUB-513M -
Ring and Pinion Installation Kits
G2 Dana 30/44 TJ/LJ 4.88 Ring and Pinion Minor Installation Kit – 4-TJ2-488M
Ring and Pinion Installation KitsG2 Dana 30/44 TJ/LJ 4.88 Ring and Pinion Minor Installation Kit – 4-TJ2-488M
- 4.88 front Dana 30 and rear Dana 44 ring and pinion kit
- For non-Rubicon 1997–2006 Wrangler TJ and LJ
- Includes front and rear matched minor installation kits
- Computer heat treated 8620 steel; limited lifetime warranty
SKU: G/24-TJ2-488M -
-
What belongs in the drivetrain
The drivetrain moves power from the crankshaft to the ground. On a typical 4x4 that means the clutch or torque converter, the transmission, the transfer case, front and rear driveshafts, and the axle assemblies with their differentials, gears, bearings and seals. The subcategories here separate those systems so you can narrow down to complete axles and third members, performance axle components, OEM-style replacement axle parts, drive shafts, shifters or transfer case upgrades.
Identify the axle before you shop
Most axle parts are specific to the axle model, spline count and sometimes the production year. Product titles in this category refer to Dana 30, Dana 35, Dana 44, Dana 80 and AMC Model 20 housings, among others. Read the data tag on the differential housing or pull the cover and count ring gear bolts and measure the ring gear diameter. A part labeled for a Dana 44 front axle will not necessarily fit a Dana 44 rear axle, so note the axle location as well as the model.
Gear ratio and differential type
- Ring and pinion ratio: a numerically higher ratio such as 4.56 or 5.38 multiplies torque more and helps larger tires turn freely, at the cost of higher engine speed on the highway.
- Matched sets: ring and pinion gears are lapped and used as a pair, and front and rear ratios must match on a four-wheel-drive vehicle.
- Open, limited-slip and locking differentials: each handles traction differently, and clutch-type limited-slip units use clutch packs and friction additives that wear over time.
Installation and setup
Gear installation depends on correct pinion depth, backlash and bearing preload. These adjustments need dial indicators, marking compound and patience, and a mistake can destroy a new gear set within a few miles. Many owners hand this work to a driveline shop. Replace crush sleeves, seals and gaskets whenever the assembly is opened, and use the gear oil grade and capacity the axle manufacturer specifies. Torque fasteners to published values.
Confirming compatibility
Always confirm fitment for your exact year, make and model, and compare the part number against the manufacturer's specifications. Spline count, axle shaft diameter, bolt pattern and housing casting numbers all matter, and cross-referencing them avoids returning the wrong part after a weekend teardown.
Maintenance habits matter as much as the parts you choose. Check axle breather tubes so they are not clogged or collapsed, since a blocked breather builds pressure and pushes oil past the seals. Inspect universal joints and slip yokes for play, grease them if they have fittings, and look at the driveshaft angles after any lift or suspension change. Vibration at a particular speed often points to a driveshaft that is out of balance or running at too steep an angle. Gear oil that looks milky has taken on water, and metallic glitter on a magnetic drain plug is a sign that something inside deserves a closer look before it fails on the trail. Keep a record of the ratio, axle model and spline count for each axle so future orders are straightforward.
When budgeting a drivetrain project, remember the supporting parts. Bearings, seals, shims, carrier hardware and fluids are all needed alongside gears, and skipping them to save a little money tends to cost more later. If you are unsure which items belong together, a driveline specialist can review your list.
Popular Drivetrain & Differential brands
- G2 Axle and Gear (320)
- Dana Spicer (127)
- Crown Automotive (115)
- Omix-Ada (63)
- Moog (59)
- Centerforce (44)
- Trail Gear (39)
- ARB 4x4 Accessories (33)
- Alloy USA (26)
- Jeep (21)
- Eaton (16)
- TeraFlex (15)
Shop Drivetrain & Differential by type
- Performance Axle Components (669)
- Drive Shafts & Drive Shaft Components (78)
- OEM Replacement Axle Parts (93)
- Complete Axles & Third Members (32)
- Clutch & Bellhousing Components (98)
- Automatic Transmissions (26)
- Shifters & Shifter Components (13)
- Transfer Cases and Replacement Parts (12)
- Transfer Case Upgrades & Crawl Boxes (7)
- Manual Transmissions Parts (5)
- Transmission and Transfer Case Mounts (6)
Drivetrain & Differential FAQ
How do I know which Dana axle I have?
Check the axle tag or stamped casting numbers on the housing, count the differential cover bolts, and look at the cover shape. Measuring the ring gear diameter after removing the cover gives a definitive answer. Confirm against the manufacturer's specifications for your year and model.
Do I need to change both axle gear ratios at once?
On a part-time or full-time four-wheel-drive vehicle, yes. Front and rear ratios must match, because mismatched ratios make the axles fight each other and can damage the transfer case and gears. Regear both axles together with the same ratio.
Is a ring and pinion set something I can install at home?
It is possible, but setting pinion depth, backlash and bearing preload takes special tools and experience. Errors cause noise and rapid wear. Many owners use a driveline shop, especially for the first gear swap.
What fluids should I replace when I work on the drivetrain?
Replace gear oil in any axle you open, plus transmission and transfer case fluid if they are involved. Use the viscosity and friction modifier requirements specified for your axle, and replace seals and gaskets while the parts are apart.





