Overview
The G2 Axle and Gear 4-XJ4-488M is a complete 4.88 ring and pinion kit with minor installation kits for the front Dana 30 and rear Dana 44 axles of 1987–1990 Jeep Cherokee (XJ) models.
Late-1980s XJs with the stronger Dana 44 rear can regear both axles with this kit. The front is a Dana 30 reverse 4.88 for a 3.73 and up carrier, and the rear is a Dana 44 4.88 for a 3.91 and up carrier. The sets use heat treated 8620 steel, shot peened twice and lapped twice.
The late XJs with a Dana 44 rear are a smaller group than those with the Dana 35, so confirm the rear axle before choosing between this kit and others. A Dana 30 reverse front is paired here with the rear Dana 44. G2 lists 3.73 and up for the front carrier and 3.91 and up for the rear. A 4.88 ratio is a common choice for Cherokees that have gone to larger tires.
Key features
- Front and rear 4.88 gear sets
- Front Dana 30 reverse, 3.73 and up carrier
- Rear Dana 44, 3.91 and up carrier
- Matched minor installation kits
- Double shot peened and double lapped
- Limited lifetime warranty.
Confirming your rear axle
Late XJs were built with more than one rear axle, so the rear housing and cover are the first things to check before buying gears. A Dana 44 rear is the larger unit, and its carrier and ring gear differ from the Dana 35. Measuring the ring gear diameter and reading the axle tag will confirm which carrier the gears need.
A 4.88 ratio pulls harder at low speed and lets engine speed rise faster on the highway, which suits Cherokees on larger tires. Gear setup is precise work, so have pinion depth and backlash checked after the swap. Look at the transmission and transfer case as well, because the new ratio changes how they run.
- Confirm the rear axle type before ordering gears
- Check the tire diameter against the chosen ratio
- Use a dial indicator to verify backlash
- Inspect axle seals and fluid levels after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 4-XJ4-488M |
| UPC | 631410141436 |
| Part type | Ring and pinion gear kit with minor installation kits |
| Gear ratio | 4.88 |
| Front axle | Dana 30 reverse, 3.73 and up carrier |
| Rear axle | Dana 44, 3.91 and up carrier |
| Steel | Computer heat treated 8620 |
| Finishing | Double shot peened, double lapped |
| Warranty | Limited lifetime |
Vehicle fitment
It fits 1987–1990 Jeep Cherokee (XJ) models with a Dana 30 front and Dana 44 rear.
This kit does not fit XJs outside 1987–1990 or those with a Dana 35 rear. Before ordering, confirm fit for your vehicle’s year, model and trim.
Installation notes
Gear setup depends on pinion depth and backlash, so most owners hand this job to a shop. G2 packages the front and rear sets together so the axles are matched.
What’s included
- Front 4.88 ring and pinion set
- Rear 4.88 ring and pinion set
- Front and rear matched minor installation kits
Not included: Bearings and other parts beyond the minor kits, so verify everything needed is on hand before starting.






