Select your vehicle

G2 Dana 30/44 YJ 4.88 Ring and Pinion Minor Installation Kit – 4-YJ2-488M

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • For the 1987–1995 Jeep Wrangler YJ with Dana 30 front and Dana 44 rear axles
  • 4.88 ring and pinion gear sets, front and rear
  • Dana 30 front and Dana 44 rear axles
  • Includes matched front and rear minor installation kits
  • Limited lifetime warranty

Description

Overview

The G2 Axle and Gear 4-YJ2-488M is a 4.88 ring and pinion gear set with front and rear minor installation kits for the 1987–1995 Jeep Wrangler YJ. The kit pairs a 4.88 front gear set for the Dana 30 front axle with a 4.88 rear gear set for the Dana 44 rear axle, so both axles of the Jeep are regeared in one kit.

For the 4-YJ2-488M, G2 describes its complete ring and pinion kits as including everything needed for a gear swap: front and rear gear sets plus the minor installation kits for both axles. The 4-YJ2-488M gives Wrangler YJ owners a 4.88 option for changing axle gearing, and G2 says its gears are engineered for oversized tires and high performance engines.

Key features

  • Complete front and rear set: 4.88 ring and pinion gear sets for both axles plus matched minor installation kits
  • Built for the Dana 30 front axle and the Dana 44 rear axle
  • Computer heat treated 8620 steel gears
  • Manufactured to O.E. specs.
  • Double shot peened and double lapped gear sets
  • Limited lifetime warranty listed by G2

Before the gear swap

Gear swaps on the Wrangler YJ touch both axles, so plan the job as one project. The front axle is a Dana 30 and the rear is a Dana 44. Changing gears alters how the drivetrain reacts under load, so the whole setup should be checked after the first drive, including the driveline and any wear on the hubs.

Owners often replace seals and bearings alongside the gears while the axles are open. A break-in drive with gentle loads helps the new teeth settle. Keep a record of the tire size and final ratio, since speedometer readings and drivetrain load both change after the swap.

  • Inspect seals and bearings while the axles are open
  • Use gentle loads during break-in
  • Recalibrate the speedometer after the change

Specifications

Brand G2 Axle and Gear
Part number 4-YJ2-488M
UPC 631410141313
Product type Ring and pinion gear sets with front and rear minor installation kits
Gear ratio 4.88
Vehicle named in listing 1987–1995 Jeep Wrangler YJ
Front axle Dana 30
Rear axle Dana 44
Axle location Front and rear
Kit type Minor kit
Gear material Computer heat treated 8620 steel
Finishing Double shot peened, double lapped
Manufacturing Manufactured to O.E. specs
Warranty Limited lifetime warranty

Vehicle fitment

Fits the 1987–1995 Jeep Wrangler YJ with a Dana 30 front axle and a Dana 44 rear axle.

The 4-YJ2-488M listing does not cover the Wrangler TJ (1997–2006), the Wrangler JK (2007–2018) and other Jeep models. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Fitting the 4-YJ2-488M changes the gear ratio on both axles of a Wrangler YJ, which is work for an experienced gear installer. The two minor installation kits in the 4-YJ2-488M are the parts used for setting the new gears, and the same 4.88 ratio goes in both axles so the drivetrain stays matched. The 4-YJ2-488M is a minor kit, and bearing sets are not among its listed contents. Plan a careful break-in for the new 4-YJ2-488M gears after installation.

What’s included

  • Front ring and pinion gear set, 4.88
  • Rear ring and pinion gear set, 4.88
  • Front minor installation kit
  • Rear minor installation kit
SKU: G/24-YJ2-488M Category:

Specification

Shipping weight 31.00 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (YJ) likely fits1987–1995All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which vehicles does the G2 4-YJ2-488M fit?

It fits the 1987–1995 Jeep Wrangler YJ. Confirm your Jeep's axles match the Dana 30 front and Dana 44 rear before ordering.

What gear ratio is the G2 4-YJ2-488M?

The 4-YJ2-488M is a 4.88 ratio kit. Both ring and pinion sets in the 4-YJ2-488M, front and rear, are 4.88, so the two axles stay matched after the gear swap.

Does the 4-YJ2-488M include both front and rear gears?

Yes. It includes front and rear gear sets plus matched minor installation kits for both axles, making it a complete gear swap package.

Which axles is the 4-YJ2-488M made for?

The 4-YJ2-488M is made for a Dana 30 front axle and a Dana 44 rear axle on the Wrangler YJ. The 4-YJ2-488M is not a kit for other axle combinations, so check your Jeep's axles first.

What materials and finishing are used on the 4-YJ2-488M gears?

It uses computer heat treated 8620 steel with double shot peening and double lapping, made to O.E. specs. It carries a limited lifetime warranty.

How can I tell if the YJ gears are worn?

Look for whining at steady speed, clunks when shifting between drive and coast, and a fluid film with metal flecks. Any of these signs calls for an inspection by a gear installer.

Is a break-in needed after installation?

Yes. Drive gently for the first stretch so the new gear teeth can seat, then check for heat, leaks and unusual noise before pushing the Jeep harder.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon