Select your vehicle

G2 Dana 44/44 JK 5.13 Ring and Pinion Minor Installation Kit – 4-JKRUB-513M

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 5.13 front and rear Dana 44 ring and pinion kit
  • For Rubicon Wrangler JK, 2 and 4 door
  • Includes front and rear matched minor installation kits
  • Computer heat treated 8620 steel; limited lifetime warranty

Description

Overview

The G2 Axle and Gear 4-JKRUB-513M is a complete 5.13 ring and pinion kit with minor installation kits for the Dana 44 front and rear axles of Rubicon Jeep Wrangler JK models from 2007 on.

A 5.13 ratio is the deepest ratio in this range and suits large tires. The kit pairs front and rear Dana 44 gear sets with matched minor installation kits. The gears are computer heat treated 8620 steel built to O.E. specs, double shot peened and double lapped.

The Rubicon JK has a Dana 44 axle at each end, so this kit is built for those two axles rather than the Dana 30 front used on other trims. G2 adds two and four door versions in the same description. A 5.13 ratio suits larger tires, in the same way that a lower first gear helps a heavy truck climb. The kit includes a matched minor installation kit for each axle.

Key features

  • Front and rear 5.13 gear sets
  • Dana 44 front and Dana 44 rear
  • Rubicon models, 2 and 4 door
  • Matched minor installation kits
  • Double lapped
  • Limited lifetime warranty.

Deep gearing and tire size

A deep ratio like this one changes how the Jeep behaves at the start of a climb and at low speed on the trail. Engine speed rises at highway cruising, so the vehicle works harder on the road. Owners often pair deep gearing with larger tires, which is why tire size and gear choice should be planned together.

Speedometer and odometer readings change after a regear, and that matters for accurate speed on the road. Recalibration is a common step after a tire and gear change. Because the Rubicon’s Dana 44 axles carry the load on hard terrain, check axle seals, ring and pinion contact and differential fluid during the first months.

  • Recheck speedometer accuracy after the change
  • Check axle seals and fluid on a regular schedule
  • Keep a log of tire size and gear ratio

Specifications

Brand G2 Axle and Gear
Part number 4-JKRUB-513M
UPC 631410141153
Part type Ring and pinion gear kit with minor installation kits
Gear ratio 5.13
Axles Dana 44 front, Dana 44 rear
Models Rubicon, 2 and 4 door
Steel Computer heat treated 8620
Finishing Double shot peened, double lapped
Warranty Limited lifetime

Vehicle fitment

It fits the 2007–2018 Jeep Wrangler JK Rubicon, in 2-door and 4-door form.

Non-Rubicon JKs with a Dana 30 front, and the TJ and JL, are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Deep gearing changes tire size and speedometer behavior, and a gear swap itself needs proper pinion depth and backlash setup. Plan on professional installation and a break-in.

What’s included

  • Front 5.13 ring and pinion set
  • Rear 5.13 ring and pinion set
  • Front and rear matched minor installation kits

Not included: Bearings and other components beyond the minor kits are not included, so check the contents against your installation before starting.

SKU: G/24-JKRUB-513M Category:

Specification

Shipping weight 36.15 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2018All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What Jeep does the G2 4-JKRUB-513M fit?

G2 names the 07-Current Wrangler JK, 2 and 4 door, Rubicon, with Dana 44 front and rear axles, so the Dana 30 front is excluded.

What ratio is the 4-JKRUB-513M?

5.13, for both the front and rear gear sets, which are matched so the axles turn together properly in four-wheel drive.

Does it fit a non-Rubicon JK?

G2 lists Rubicon models, so a non-Rubicon JK with a Dana 30 front axle is not the target of this kit.

What is included?

Front and rear 5.13 ring and pinion sets, each with a matched minor installation kit. Compare the minor kit parts with your planned steps before starting.

Does a deep ratio affect fuel economy?

It can. Higher engine speed at highway cruising usually costs fuel, while low-speed trail work is where deep gearing helps most. Driving habits and tire size also play a part.

Do I need the front and rear gear kits together?

Yes. Front and rear ratios should match so the four-wheel-drive system does not bind. Buying both sets together keeps the axles in step.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon