Dana 30 vs Dana 44 vs Dana 60: how to identify the axle under your Jeep or truck, what each one handles, and when…
Dana 44 Axle Parts, Axles, Gears, and Modifications
Showing 301–312 of 469 resultsSorted by popularity
-
Outer Axle Tube Seals
Alloy USA Dana 30/44 Black Outer Axle Tube Seals (Black) – 11103
- Alloy USA part number 11103 front axle outer tube seals for 1997-2006 Jeep Dana 30 and Dana 44 front axles
- CNC machined billet aluminum with a black anodized finish
- Double sealing keeps water, mud and debris out of the front axle housing
- Sold in pairs
- Will not work with a passenger side vacuum disconnect two-piece axle shaft
SKU: ALY11103 -
Outer Axle Tube Seals
Alloy USA Dana 30/44 Red Outer Axle Tube Seals (Red) – 11102
- Pair of machined billet aluminum front axle tube seals in red anodized finish.
- Fits Dana 30 and Dana 44 front axles on 1997 to 2006 Jeep Wrangler TJ models.
- Double sealing protects the housing from water, mud and debris.
- Not for Wrangler models with a passenger side vacuum disconnect two-piece axle shaft.
SKU: ALY11102 -
Dana 44 Axle Shafts
Alloy USA Dana 30 Front Dana 44 Front Outer – 10128
- Front outer stub shaft for Dana 30 and Dana 44 front axles, 27 splines
- Driver and passenger side, 5-760X U-joint
- Fits International Scout II and Jeep CJ5, CJ6 and CJ7
- Made from 1541H or 4140 steel
- Induction hardened, Alloy USA part 10128
SKU: ALY10128 -
-
Dana 44 Axle Shafts
Alloy USA Front 27 Spline Outer Axle Shaft – 10104
- Front outer stub shaft with 27 splines, driver or passenger side
- Overall length 6.11 inches
- Fits 1987–1995 Jeep Wrangler YJ and 1997–2006 Jeep Wrangler TJ
- Accepts a 5-760X U-joint
- Made from 1541H or 4140 steel, induction hardened
SKU: ALY10104 -
Dana 44 Axle Shafts
Alloy USA Dana 44 Chromoly Rear Axle Kit – 12137
- Alloy USA Dana 44 Mas Grande rear axle kit, part number 12137
- 35 spline kit built for an aftermarket 35 spline carrier
- 4340 chromoly axle shafts, heat-treated twice
- Wheel bearing and seal kits and wheel studs included
- 10-year warranty listed
SKU: ALY12137 -
Dana 44 Ball Joints
Alloy USA Dana 30/44 Heavy Duty Ball Joints – 11801
- Alloy USA 11801 heavy duty front ball joints for 1993 to 1998 Jeep Grand Cherokee ZJ
- Includes two upper and two lower ball joints
- 4140 Chromolly steel with a high strength steel socket inner insert
- Dana 30 TJ axle listed with Universal Fit
SKU: ALY11801 -
Dana 44 Ball Joints
Alloy USA Dana 30/44 JK Heavy Duty Ball Joints – 11800
- Heavy-duty ball joint kit for Dana 30 and Dana 44 front axles on Jeep JK Wranglers, part number 11800
- Low-profile grease zerk for regular lubrication
- Steel socket insert in place of the factory nylon insert
- Ball and shaft from SAE 4140 chromoly steel
- Designed for 2007–2018 Jeep Wrangler JK
SKU: ALY11800 -
-
Dana 44 U-Joints
Alloy USA Dana 44 Extreme Duty Axle U-Joints – 11500
- Alloy USA extreme duty U-joints, part 11500, for Dana 44 axles
- O.E.M style needle bearings rather than bushings
- Snap ring to snap ring size 2.188 inches, cup size 1.188 inches
- Highway rated and lubeable
- UPC 80431418134
SKU: ALY11500 -
Dana 44 Ring and Pinion
Genuine Packages JK Rubicon Front and Rear 4.56 Ring and Pinion Package – JKGEARPKG6
Dana 44 Ring and PinionGenuine Packages JK Rubicon Front and Rear 4.56 Ring and Pinion Package – JKGEARPKG6
- Genuine Packages JKGEARPKG6 front and rear ring and pinion package
- 4.56 gear ratio for front and rear axles
- Dana 44 JK axle type listed
- Inferred fit for the 2007-2018 Jeep Wrangler JK from the JK Rubicon title
SKU: ADDJKGEARPKG6 -
Dana 44 Ring and Pinion
G2 JK Rubicon Front and Rear 5.13 Ring and Pinion Kit – 4-JKRUB-513
- Front and rear 5.13 ring and pinion kit for Rubicon JK Wranglers
- Dana 44 front axle and Dana 44 rear axle
- Matched front and rear master installation kits
- Computer heat treated 8620 steel
- Limited lifetime warranty
SKU: G/24-JKRUB-513
About the Dana 44
The Dana 44 is a popular medium-duty axle used in Jeeps, Ford trucks and Broncos, and other 4x4s, front or rear, and it is a common base for upgrades. Variants differ by spline count, housing, and mounting, so identify your axle carefully before ordering anything. The tag on the housing, the spline count, and the vehicle application are the starting points.
Parts here span routine maintenance items like seals and bearings through full gear and locker upgrades.
Gearing and differentials
Ring and pinion sets are chosen by ratio, such as 4.10, 4.56, or 5.13, usually to compensate for larger tires. Front and rear ratios must match, and sets should be installed with a master installation kit containing bearings, shims, and seals. Gear setup requires correct pinion depth and backlash measurements.
- Lockers and spools lock both wheels together for maximum traction.
- Limited slip units share torque between wheels while allowing some difference in speed.
- Open differential parts support rebuilds of the stock design.
Shafts, hubs, and wear parts
Axle shafts must match spline count and length, and some models need ABS tone rings or particular flange designs. Hubs, spindles, and ball joints wear with miles and trail use, and seals and bearings should be replaced together to protect the new components. U-joints and yokes need to match the shaft and driveline series.
Check the axle ratio, spline count, and brake configuration before purchasing any internal parts.
Installation guidance
Axle work is safety critical. Gear setup requires special tools and experience, and incorrect setup can cause noise and failure. Use jack stands, torque fasteners to specification, fill with the correct gear oil, and break in new gears gently. Professional installation is recommended for ring and pinion and locker work. Confirm fitment for your exact year, make, and model, and check the manufacturer's specifications.
Preparing for an axle project
Plan the project before tearing anything down. Identify the axle and its ratio, decide which parts to replace, and gather seals, bearings, gear oil, thread locker, and RTV or gaskets. Mark the driveshaft and carrier caps and keep parts organized.
Check axle housing straightness, tube condition, and mounting brackets. Many people upgrade axle shafts, lockers, and gears at the same time, because the housing is already open. Fill with the specified oil and drive gently for the first few hundred miles.
Spline count and axle shaft length are two of the first measurements to confirm. Dana 44 shafts come in different spline counts, and the inner and outer shafts on a front axle are different lengths on each side. Check the U-joint series, hub bolt pattern, and brake rotor mounting before choosing shafts.
Ring gear size, carrier break, and the pinion design also vary. Front and rear ring and pinion sets are not interchangeable, and a standard-rotation unit differs from a reverse-rotation unit found in some Jeep front axles. Carrier bearings and shims must be selected to suit the carrier you use.
Gear oil, additives, and limited slip friction modifiers all matter. Limited slip units often need a friction modifier, and lockers may need a particular type of oil. Check the oil level at each service, look for metal in the drain plug, and replace seals at the first sign of leaks to protect the brakes.
Related guides
- Dana 30 vs Dana 44 vs Dana 60: Which Axle Is Under Your Jeep or Truck, and When to Upgrade
- First SUV: The International Harvester Scout 80 Story
The first SUV wasn't a Jeep. See how the International Harvester Scout 80 came to be, how the Scout 800 and Scout II followed,…
- Is Your Dana 44 Vent Destroying Your Axle?
Learn how a Dana 44 axle vent works, which vent locations let water into the gear oil, and how to add a top-mounted breather…
Popular Dana 44 Axle Parts, Axles, Gears, and Modifications brands
- G2 Axle and Gear (178)
- Dana Spicer (93)
- Crown Automotive (58)
- Omix-Ada (35)
- Alloy USA (33)
- ARB 4x4 Accessories (13)
- TeraFlex (9)
- Auburn Gear (7)
- Detroit Locker (6)
- Rubicon Express (6)
- Warn (4)
- RCV Axles (4)
Shop Dana 44 Axle Parts, Axles, Gears, and Modifications by type
- Dana 44 Axle Shafts (84)
- Dana 44 Ring and Pinion (68)
- Dana 44 Bearings and Install Kits (63)
- Dana 44 Oil Seals (56)
- Dana 44 Complete Assemblies (38)
- Dana 44 Differential Covers (31)
- Dana 44 Miscellaneous Parts (31)
- Dana 44 Hubs and Spindles (26)
- Dana 44 Lockers and Spools (26)
- Dana 44 Ball Joints (18)
- Dana 44 Drive Yokes and Flanges (13)
- Dana 44 U-Joints (9)
- Dana 44 Limited Slip Differentials and Parts (9)
- Dana 44 Open Differential Parts (7)
Dana 44 Axle Parts, Axles, Gears, and Modifications FAQ
How do I identify a Dana 44?
Look for a tag on the axle housing, a cover shape and bolt count, and the vehicle application. Spline count and ring gear diameter can be measured. Dana 44 variants differ, so verify before ordering parts.
What gear ratio should I choose?
Pick a ratio that restores performance with your tire size. Larger tires often call for numerically higher ratios, like 4.56 or 5.13, and front and rear ratios must match. Engine, transmission, and use all matter.
Do I need a master install kit?
It is strongly recommended with new gears. The kit includes bearings, seals, and shims needed to set pinion depth and backlash correctly. Reusing worn bearings can hurt gear life.
Can I install gears myself?
Only if you have the tools and experience. Setting pinion depth and backlash is precise work, and mistakes damage new gears. Many owners use a professional shop for ring and pinion installations.












