Overview
The JKGEARPKG6 is a 4.56 ratio front and rear ring and pinion package for the JK Rubicon, the Jeep Wrangler JK built from 2007 to 2018. It covers both axles, with Dana 44 JK as the axle type.
These gear sets are designed for oversized tires and higher performance engines. They are built with current manufacturing methods and materials and are designed to run quietly under load.
Key features
- Front and rear 4.56 ring and pinion package
- Dana 44 JK axle type listed
- Designed for oversized tires and higher performance engines
- Built with current manufacturing technology and materials
- Designed for strong, quiet running
- Covers front and rear axles
Oversized tires and gearing
Larger tires reduce effective gearing, which is why many owners regear when they upgrade. A numerically higher ratio helps the engine work less hard at low speed, but it also raises engine speed at highway speed. Choose the ratio with tire diameter, transmission and typical driving in mind rather than only chasing low-speed pulling.
Front and rear gears should be chosen as a pair. Mismatched ratios stress the drivetrain, so both axles are usually regeared together. Pinion depth and bearing preload need to be set on each axle, and a break-in period helps the new teeth settle.
- Match front and rear ratios as a pair
- Plan the ratio around tire diameter and highway speed
- Check backlash and contact pattern on both axles
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | JKGEARPKG6 |
| UPC | 70000813780 |
| Axle type | Dana 44 JK |
| Axle location | Front and rear |
| Gear ratio | 4.56 |
| Popular axle manufacturer | Dana |
| Package | Front and rear ring and pinion |
Vehicle fitment
The package is built for the 2007-2018 Jeep Wrangler JK, including the JK Rubicon with Dana 44 JK axles front and rear. Make sure year, model and trim agree with your vehicle before ordering.
Wrangler YJ, TJ, LJ and JL generations are not covered by this package. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front and rear ring and pinion sets need correct pinion depth, backlash and bearing preload on both axles. Plan for professional setup and a break-in period, and use jack stands while working under the vehicle.
What’s included
The package is a front and rear ring and pinion set. Compare bearings, carrier parts and installation hardware against your plan before starting.








