Overview
The Alloy USA Dana 30 and Dana 44 front outer shaft, part 10128, is a 27 spline outer stub for driver or passenger side use. It fits the 1971–1980 International Scout II, the 1969–1983 Jeep CJ5, the 1972–1975 Jeep CJ6 and the 1976–1986 Jeep CJ7.
The shaft is made from 1541H or 4140 steel. Induction hardening is designed to give twice the tensile strength of stock, up to 35% more strength. It is built for a 5-760X U-joint and fits the Dana 30 reverse, Dana 30 TJ and Dana 44 front axle types.
Key features
- 27 spline outer stub shaft
- Works on driver or passenger side
- Built for a 5-760X U-joint
- Fits Scout II and CJ5, CJ6 and CJ7 models
- 1541H or 4140 steel, induction hardened
Matching the axle family
Dana 30 and Dana 44 front axles look similar but use different hub and shaft dimensions, so identifying your axle before buying is the most important step. Check the axle housing, the ring gear and the hub style, or the axle codes stamped on the housing. The 27 spline count on the new shaft has to match the stub you remove, and the U-joint end has to match the joint on your axle.
On older CJ and Scout trucks, front shafts see steady wear from off-road use, and the splines and U-joint connection are common failure points. Replacing a worn outer shaft is often done alongside the hub, seals and bearings. Keep the old shaft for comparison until the new one is confirmed to fit.
- Identify the axle type before ordering
- Compare spline count and joint size with the old shaft
- Inspect hub seals and bearings during the job
- Check for play at the U-joint after installing
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 10128 |
| UPC | 70000407246 |
| Axle types | Dana 30 reverse, Dana 30 TJ, Dana 44 |
| Axle location | Front |
| Shaft location | Outer stub |
| Side | Driver and passenger |
| Spline count | 27 splines |
| U-joint | 5-760X |
| Material | 1541H or 4140 steel, depending on application |
| Treatment | Induction hardened |
Vehicle fitment
It fits the 1971–1980 International Scout II, the 1969–1983 Jeep CJ5, the 1972–1975 Jeep CJ6 and the 1976–1986 Jeep CJ7.
Jeep Wrangler and Cherokee models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The list spans two axle types, so confirm which front axle your Scout or CJ uses before ordering. The 27 spline count has to match the stub you remove.
What’s included
One outer axle shaft.
Not included: U-joint.









