Overview
The 4-JKRUB-513 is a 5.13 ratio front and rear ring and pinion kit for the Rubicon Jeep Wrangler JK. The JK code in the name places it in the 2007-2018 Wrangler range. The kit is designed for Rubicon models, which use Dana 44 axles at both the front and rear.
The kit delivers one matched front and rear gear set, so the 5.13 ratio goes in at both ends in one job. Matched master installation kits come with the gears, and the set is made to original equipment specifications from computer heat treated 8620 steel.
Key features
- Front and rear 5.13 ratio ring and pinion sets
- Dana 44 gear sets for both axles
- Matched master installation kits for each end
- Computer heat treated 8620 steel gears
- Double shot peened and double lapped
Tire size and gear choice
A 5.13 ratio is a low-speed gear set meant for slow trail work and larger tires. It increases torque at the wheels, which helps with climbing and crawling, while cruising speed drops and engine revs rise. Pairing the gears with a tire size that matches the plan keeps the drivetrain from working harder than it needs to.
After the swap, check the speedometer and odometer readings, since a change in ratio or tire size shifts them. Look over the axle shafts, bearing caps and cover seals on both ends, and keep the gear oil at the correct level. A short road test helps reveal any whine from the new gears before longer trips.
- Torque increases for climbing and crawling
- Cruising speed and engine revs change with the ratio
- Speedometer checked after tire or gear changes
- Gear oil and seals checked on both axles
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 4-JKRUB-513 |
| UPC | 700007521571 |
| Gear ratio | 5.13 |
| Front axle | Dana 44 JK |
| Rear axle | Dana 44 JK |
| Material | Computer heat treated 8620 steel |
| Models | Rubicon |
| Warranty | Limited lifetime |
Vehicle fitment
Fitment comes from the JK chassis code for the Jeep Wrangler (JK), 2007-2018. The kit is designed for Rubicon models with Dana 44 front and rear axles.
The 2007-2018 range covers the JK generation only, so the TJ, LJ and JL Wranglers are not covered. A non-Rubicon JK may use a different front axle, so confirm the axle setup first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the tire size and the axle setup against the 5.13 ratio before the swap. Set pinion depth and backlash on both axles after the gears are in.
What’s included
Front and rear 5.13 ring and pinion sets, plus matched master installation kits for each axle.

















