Overview
The Crown Automotive J8127350 is a large V-ring spindle seal for the front axle. It is a direct fit for the Dana 44 front axle, and it is also made for the Dana 30.
The seal keeps lubricant at the spindle, and its listed fitment is mainly older Jeep models: the CJ5 and CJ7, SJ-era Cherokee, Wagoneer and Grand Wagoneer, the J10 and J20 pickups and the Scrambler.
Key features
- Large V-ring design
- Front axle position
- Dana 44 axle type, with Dana 30 also named
- Direct fit for the listed vehicles
Replacing a front spindle seal
A spindle seal sits between the knuckle and the hub, holding lubricant in the wheel bearing area while keeping water and grit out. Old lip seals harden with heat and age, and a leaking one often leaves a dark ring on the inside of the wheel or a film on the brake components. Because the seal sits right next to the bearing, a leak left alone can lead to bearing damage and a noisy hub.
When replacing the seal, check the spindle surface for grooves or rust, since a damaged surface wears a new seal quickly. Pack the bearing and hub area with the grease your vehicle requires, and fit the seal squarely so the lip is not folded over. Inspect the wheel bearings and hub at the same time, and recheck for leaks after the first drive.
- Check the spindle for grooves or rust
- Fit the seal square to the housing
- Inspect bearings while the hub is apart
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8127350 |
| UPC | 848399069075 |
| Seal type | Large V-ring spindle seal |
| Position | Front |
| Axle type | Dana 44 (Dana 30 also named) |
| Fitment | Direct fit |
Vehicle fitment
It fits 1977–1983 CJ5 and 1977–1986 CJ7 models, 1981–1983 Cherokee (SJ), 1981–1990 Wagoneer (SJ), 1984–1990 Grand Wagoneer (SJ), 1981–1988 J10 and 1987–1988 J20 pickups, and 1981–1985 Scrambler models.
The list does not include Wrangler or XJ Cherokee models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One large V-ring spindle seal.









