Performance Steering Upgrades
Showing 13–24 of 96 resultsSorted by popularity
-
Steering Gear Box & Components
TeraFlex HD Drag Link Flip Kit with Front Track Bar Drop Bracket & Frame Brace Kit – 1600450
Steering Gear Box & ComponentsTeraFlex HD Drag Link Flip Kit with Front Track Bar Drop Bracket & Frame Brace Kit – 1600450
- Drag link flip kit with track bar drop bracket and frame brace for Wrangler JK
- For 4-6 inch lifts, Dana 30 and 44
- Drag link is 50% stronger than the factory part
SKU: TER1600450 -
Steering Gear Box & Components
RockJock 4X4 JL/JT Currectlync Steering System – RJ-442100-101
- Heavy-duty steering system for the Jeep Wrangler JL and Gladiator JT
- 42mm alloy steel tie rod and 1.3 inch forged drag link
- Includes high-mount steering stabilizer relocation bracket kit
SKU: R/JRJ-442100-101 -
Steering Gear Box & Components
PSC Steering Steel Auxiliary Mounting Bracket for Remote Reservoir – MR06
Steering Gear Box & ComponentsPSC Steering Steel Auxiliary Mounting Bracket for Remote Reservoir – MR06
- PSC Steering MR06 steel auxiliary right-angle mounting bracket for a remote reservoir
- Made to mount a reservoir onto a vertical surface such as a firewall
- Universal fit; no vehicle named
SKU: PSMMR06
What counts as a steering upgrade
Lifting a vehicle or fitting larger tires changes steering geometry and adds load to every link in the system. Upgrades in this category address that. Typical parts include inner and outer tie rod ends, heavy-duty drag links, drop pitman arms, high steer kits that move the tie rod above the knuckle, flip kits that correct drag link angle, steering knuckles, and power steering components such as reservoir clips and anti-splash valves.
Matching parts to the problem
- Wandering or loose steering after a lift: replace worn tie rod ends and check the drag link and track bar angles.
- Bump steer on a lifted solid-axle vehicle: a drop pitman arm or drag link flip kit helps restore a level drag link.
- Bent tie rods on the trail: a high steer kit or heavier-wall tubes tuck the linkage out of harm.
- Worn ball joints or damaged knuckles: a replacement knuckle may be a better answer than patching the old one.
Specs to compare
Look at the position listed on the product page, such as front inner, front outer, driver side, or passenger side. Note whether a part is sold individually or as a pair, and whether the listing is a direct replacement or modified design. For adjustable or heavy-duty linkage, compare tube diameter and wall thickness, joint type, and whether the end uses a tapered stud that fits your knuckle. Greasable joints are easier to maintain than sealed ones.
Installation and safety
Steering parts are safety critical. Tapered studs must be seated and torqued to the manufacturer specification, and cotter pins or nylon-insert locknuts must be reinstalled. Any change to tie rods, drag links, or knuckles calls for a professional alignment afterward. If you are not experienced with steering work, have the parts installed by a qualified shop.
Confirming fitment
Steering parts vary widely by year, axle, and drivetrain. Confirm fitment for your exact year, make, and model, including 2WD or 4WD, and check the manufacturer specifications. Combining parts from different brands can create clearance or geometry problems, so use components designed to work together.
Finally, inspect rubber boots on joints at every oil change. A torn boot lets dirt in and shortens joint life, and catching it early is far cheaper than replacing a damaged tie rod or knuckle later.
Inspection and common pairings
Check steering every time you change oil. With the front end supported and the wheels off the ground, grip each tire at nine and three o'clock and look for play at the tie rod ends and drag link joints, then check the pitman arm nut and the steering box mounting bolts. Steering upgrades work best when matched. A drop pitman arm pairs with a drag link flip kit, and heavier tie rod and drag link assemblies pair with a track bar bracket and frame brace when the lift raises the axle. Moog-style replacement ends suit a stock-geometry repair, while a high steer system suits heavy trail use. Avoid mixing joint sizes, because a mismatched tapered stud will not seat.
Popular Performance Steering Upgrades brands
- Moog (37)
- Trail Gear (8)
- TeraFlex (7)
- Fabtech (6)
- PSC Steering (6)
- Crown Automotive (5)
- Tuff Country (4)
- Rough Country (4)
- Dana Spicer (4)
- Skyjacker (3)
- Pro Comp Suspension (3)
- Borgeson Steering (2)
Shop Performance Steering Upgrades by type
- Tie Rod Assemblies & Components (41)
- Steering Gear Box & Components (36)
- Steering Knuckles & Components (11)
- Power Steering Components (5)
Performance Steering Upgrades FAQ
How do I know if my tie rod ends are worn?
Signs include play in the steering wheel, clunking over bumps, uneven tire wear, and wandering at speed. A shop can check by wiggling the wheel with the vehicle lifted. Replace worn ends in time, since a failed tie rod causes loss of steering.
What does a drop pitman arm do?
A drop pitman arm lowers the end of the arm so the drag link sits closer to level on a lifted vehicle. This can reduce bump steer. Choose one designed for your steering box and lift height.
Do I need an alignment after replacing tie rods?
Yes. Tie rod changes alter toe, and a professional alignment sets toe, camber, and caster correctly. Skipping it can cause rapid tire wear and poor handling.
What is a high steer kit?
A high steer kit moves the tie rod above the steering knuckle instead of in front or behind it. That raises it out of the way of rocks and can improve geometry, but it typically requires special knuckle arms and professional setup.









