Overview
The Moog K440002 is a stock-replacement pitman arm for power steering on 2003–2008 Dodge Ram 2500 and 3500 trucks. It is made from an engineered steel composition.
Moog warns that loose or worn chassis parts can cause tires to wear out early. Replacing a worn pitman arm with this steel replacement is one way to address that, and it keeps the original steering geometry because it is not a drop arm.
Key features
- Stock replacement amount of drop
- For power steering
- Engineered steel composition for strength
- The arm is made of steel designed for everyday steering loads.
- Direct fit
Steering geometry and wear
The pitman arm links the steering gearbox to the drag link, so it carries the full steering load on every turn. Because it sits between the gearbox and the rest of the linkage, wear here changes how the front wheels respond. Looseness at the arm often shows up as wander, vague steering or a clunk when turning from lock to lock.
Stock-replacement arms keep the factory geometry, which matters for steering feel and tire wear. Before replacing the pitman arm, inspect the drag link, tie rods and ball joints, since worn components are often replaced together. After installation, a front-end alignment helps the new arm and the rest of the linkage work together.
- Check for play at the pitman arm nut
- Inspect the drag link and tie rod ends
- Replace the pitman arm nut and cotter pin as needed
Specifications
| Brand | Moog |
|---|---|
| Part number | K440002 |
| Product | Pitman arm |
| Amount of drop | Stock replacement |
| Steering type | Power steering |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2003–2008 Dodge Ram 2500 (including Power Wagon) and the 2003–2008 Dodge Ram 3500.
The Ram 1500 and later model years are not covered by the K440002. Confirm your vehicle’s year, model and trim before ordering.










