Overview
The Pro Comp pitman arm DC602, also marked EXPDC602, is a 4-inch drop pitman arm for 2019-2020 Ram 2500 trucks with power steering, including the Power Wagon.
Pro Comp explains that after a lift the drag link attachment point has to move down to reduce link angle, which is why lifted trucks need a drop pitman arm. The DC602 is intended for models with a 4-inch lift and provides steering correction.
It fits power steering trucks only, so it will not suit a manual steering setup.
Key features
- 4-inch drop
- Corrects drag link angle on lifted trucks
- For power steering
- Intended for Ram 2500 models with a 4-inch lift
- Direct-fit
Drop arms and steering geometry
A drop pitman arm lowers the point where the drag link attaches to the steering box, reducing the angle the drag link runs through after a lift. Less angle means less bind and steadier steering, especially on power steering trucks where the box and linkage carry the load. The arm is part of the steering path, so it should be checked whenever the front suspension changes.
Related parts are often inspected together with a drop arm. Look at the drag link ends, tie rod ends, steering box mounts and the track bar for wear or play. Check the front alignment after installation, and watch for pulling or a wandering steering wheel. Any steering component with looseness should be repaired before the truck is driven on rough terrain.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPDC602 |
| Amount of drop | 4 inches |
| Steering type | Power steering |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2019-2020 Ram 2500 in Big Horn, Laramie, Laramie Longhorn, Limited, Lone Star, Power Wagon and Tradesman trims.
It fits the Ram 2500 only, not the 1500 or 3500. Verify your year, model and trim before you order.
Installation notes
A drop pitman arm is intended to restore steering geometry after lifting, so check front alignment and steering response after installing it.









