Overview
The Moog DS1017T is a left-hand inner tie rod end for the 1980-1990 Ford Bronco and the 1980-1990 Ford F-150, F-250 and F-350 pickups, with F-100 coverage for 1980-1983. The tie rod end connects the steering linkage to the steering arm, and Moog sells this one individually rather than as a pair.
It is part of the Problem Solver line, built for steering that feels like new, simpler installation and longer service life. Part number MOGDS1017T is a direct-fit replacement for the Ford applications below.
Key features
- Left hand inner position, sold individually
- Powdered metal gusher bearing design lets grease flow through the bearing to the stud, which Moog says reduces friction
- Sunoloy coated metal bearings (patent pending) for smooth stud swing
- The cover plate is built to tighter tolerances than traditional cover plates.
- Exclusive cover plate keeps contaminants out of the bearing surface
- Direct-fit replacement
Choosing an inner tie rod end
The inner end is the joint that connects the steering rack to the outer end, so it takes side loads every time the wheel turns. Because it works in a sheltered area behind the steering components, it often wears quietly, and play tends to appear first as a loose or wandering feel on the highway.
When replacing one, match the thread and side before you start, then check whether the outer end on the same side has play too. Those two parts are often replaced together, and the boot on the inner joint should be inspected for tears before the truck goes back on the road.
- Look for torn boots and grease on the inner joint
- Check the outer end on the same side for play
- Replace rack parts only if inspection shows wear
Specifications
| Brand | Moog |
|---|---|
| Part number | MOGDS1017T |
| Product line | Problem Solver |
| Part type | Tie rod end |
| Position | Left hand inner |
| Quantity | Sold individually |
| Fit type | Direct fit |
Vehicle fitment
The DS1017T fits the 1980-1990 Ford Bronco, 1980-1983 Ford F-100, and 1980-1990 Ford F-150, F-250 and F-350.
The list stops at 1990 for the Bronco and the F-150 through F-350, so later generations are not covered, and the F-100 entry ends in 1983. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is an inner tie rod end, it sits at the steering linkage side and is paired with its outer end. A wheel alignment is normally needed after any tie rod replacement.









