Brake Lines & Fittings
Brake lines, hoses and fittings for lifted and stock 4x4s, including stainless steel braided lines, rubber hoses, banjo bolts, bleeder valves and line relocation brackets. This category is for owners extending or replacing brake lines after a lift or restoring worn hoses. Brands include Skyjacker, Omix-Ada, Crown Automotive and Rock Krawler. Open a product page for lengths and fitment notes, then compare the products below.

Your brake hoses are the one hydraulic link that has to survive every inch of axle droop and full steering lock. When a lift or longer shocks add travel, the factory hoses are often the first thing to come up short.
Brake hoses make up most of this section, in rubber and stainless braid, sized by lift height for Jeep, Ford, Ram and classic 4x4 models. Hard line kits, many in stainless, cover CJ and Willys restorations. Relocation brackets and anchors let the factory hose reach without a full replacement. Banjo bolts, bleeder screws and speed bleeders handle the hardware at each end.
Shop brake hoses, lines and hardware
Popular brake lines and fittings
-
Brake Hose
Pro Comp Brake Hose Kit
- Pro Comp brake hose kit, part number 7460, with front left and front right hoses at 22.5 inch
- Stainless steel braid, a complete kit to replace stock rubber hoses
- Lifted length, for vehicles with increased ride height
- Confirm fit for your vehicle before ordering.
SKU: EXP7460 -
-
-
-
-
Brake line and fluid reference
Hose lengths and thread sizes taken from parts in this section, with the standard brake fluid ratings. Compare lengths with your old hose measured fitting to fitting.
Hose lengths from listed kits
| Front | Rear | |
|---|---|---|
| Ranger / Bronco II, 5" lift | 25.25" L, 26" R | 26.25" |
| Bronco / F-150 1980–89, 4–6" | 26" | 24.75" |
| Bronco / F-150 1993–96, 4–6" | 23" | 22" |
| Pro Comp kit, 4–6" lift | 25" | 17.25" |
| Dorman TJ / LJ, driver front | 21.93" (4" added) | Not included |
| Rubicon Express front pairs | 20" or 24" | Not included |
Brake fluid ratings (FMVSS 116)
| Base | Min dry / wet boil | |
|---|---|---|
| DOT 3 | Glycol ether | 401°F / 284°F |
| DOT 4 | Glycol ether | 446°F / 311°F |
| DOT 5.1 | Glycol ether | 500°F / 356°F |
| DOT 5 | Silicone | 500°F / 356°F |
Threads and fittings
| Banjo bolt, 2013–18 JK, WK, Ram | M10 x 1.25 x 24 mm |
|---|---|
| Bleeder screw, CJ and Willys | 1/4"-28 thread |
| Common US hard line | 3/16" tube, 3/8"-24 tube nuts |
| SAE inverted flare | 45° double flare |
| Metric (ISO) systems | Bubble flare; not interchangeable |
| Banjo connections | New copper crush washer each side |
Relocation brackets in this section
| Jeep JL / Gladiator JT front | RockJock: bolts to control arm studs |
|---|---|
| Jeep JK front, 2011–2018 | Rugged Ridge bolt-on pair |
| Jeep JK front, 2007–2018 | TeraFlex anchors with sensor wire channel |
| Jeep JK rear, 2007–2015 | TeraFlex extension brackets, pair |
| Proportioning valve | Trail Gear relocation bracket kit |
Never mix DOT 5 silicone fluid with glycol fluids. Check your master cylinder cap for the specified type before bleeding.
All Brake Lines & Fittings 209 parts
-
-
Brake Hose
Baer Brakes 21.5 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800501
Brake HoseBaer Brakes 21.5 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800501
- Baer Brakes 6800501: a 21.5-inch braided brake hose set with a 3AN female straight end and a 10 mm banjo end at 20 degrees.
- Two hoses per set, packaged as a pair, with a Teflon liner and DOT approved construction.
- Attaches directly to an OE hard line; crush washers are not included.
- Confirm fit for your vehicle’s year, model and trim before ordering.
SKU: 6800501-BKCZ -
Brake Hose
Baer Brakes 23 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800502
Brake HoseBaer Brakes 23 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800502
- Baer Brakes 6800502: a 23-inch steel braided brake hose set with a 3AN female straight end and a 10 mm banjo end at 20 degrees.
- Packaged as two hoses per set, each attaching directly to an OE hard line.
- Stainless steel hose material with a Teflon liner, DOT approved.
- Confirm fit for your vehicle’s year, model and trim before ordering.
SKU: 6800502-BKCZ -
Brake Hose
Baer Brakes 25.25 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800503
Brake HoseBaer Brakes 25.25 Inch Long Braided Hose Set With 3AN Female Straight X 10Mm 20 Degrees Banjo Ends – 6800503
- Baer Brakes 6800503 is a 25.25 inch braided brake hose set
- 3AN female straight end and 10mm, 20 degree banjo end
- Two stainless steel braided hoses supplied as a pair
- DOT approved, Teflon-lined, attaches to OE hard line
- Crush washers not included; fitment not listed
SKU: 6800503-BKCZ -
Brake Lines & Fittings
Baer Brakes Remaster To Remaster Prop Valve Hardlines Baer 15/16 Inch And 1 Inch Remaster – 6801311
Brake Lines & FittingsBaer Brakes Remaster To Remaster Prop Valve Hardlines Baer 15/16 Inch And 1 Inch Remaster – 6801311
- Polished stainless steel banjo hard lines, two per kit
- For 15/16 inch and 1 inch bore Remaster master cylinders
- Includes four banjo bolts and eight copper crush washers
- Left and right port configurations for a Remaster to Remaster proportioning valve
SKU: 6801311-BKCZ -
Brake Hose
Baer Brakes 3/8-24 Inverted Flare Hard Lines For 15/16 Inch Or 1 Inch Bore Master Cylinders To Proportioning Valve – 6801312
Brake HoseBaer Brakes 3/8-24 Inverted Flare Hard Lines For 15/16 Inch Or 1 Inch Bore Master Cylinders To Proportioning Valve – 6801312
- Two stainless steel inverted flare hard lines with 3/8-24 inch proportioning outlet fittings
- For Baer Remaster master cylinders with a 15/16 inch or 1 inch bore
- Connects a Baer Remaster proportioning valve to a Remaster master cylinder
- Fits left and right port configurations; set includes four tube nuts
SKU: 6801312-BKCZ -
Brake Hose
Baer Brakes 3/8-24 Inverted Flare Hard Lines For 15/16 Inch Or 1 Inch Bore Master Cylinders To General Fit Proportioning Valve – 6801313
Brake HoseBaer Brakes 3/8-24 Inverted Flare Hard Lines For 15/16 Inch Or 1 Inch Bore Master Cylinders To General Fit Proportioning Valve – 6801313
- Connects a Baer ReMaster master cylinder to the Baer general fit proportioning valve, part number 2000035
- Stainless steel inverted flare hard line with a 3/8-24 proportioning outlet port
- Fits 15/16 inch and 1 inch bore ReMaster master cylinders, left and right port
- Includes one hard line and two tube nuts with mounting hardware
- Fitment not listed; Baer part number 6801313
SKU: 6801313-BKCZ -
Brake Hose
Baer Brakes Remaster To Remaster Prop Valve Hardlines Baer 1-1/8 Inch Remaster – 6801318
- Baer Brakes 6801318 polished stainless banjo hard line kit for 1-1/8 inch Remaster
- Two pre-formed lines, four banjo bolts and eight copper crush washers
- Connects a Remaster master cylinder to a Remaster proportioning valve
- Fits left and right port Remaster configurations
- No vehicle fitment listed; match by bore size and valve type
SKU: 6801318-BKCZ -
Brake Hose
Baer Brakes 3/8-24 Inverted Flare Hard Lines For 1-1/8 Inch Bore Master Cylinders To Proportioning Valve – 6801319
Brake HoseBaer Brakes 3/8-24 Inverted Flare Hard Lines For 1-1/8 Inch Bore Master Cylinders To Proportioning Valve – 6801319
- Baer Brakes 6801319 stainless steel inverted flare hard lines, 3/8-24 proportioning outlet
- Connects a Baer 1-1/8 inch Remaster master cylinder to a Remaster proportioning valve
- Works with left and right port Remaster cylinders
- Pair of pre-formed lines with four tube nuts included
- Listed as not DOT approved
SKU: 6801319-BKCZ -
-
Why brake lines matter on a 4x4
Brake hoses are the flexible links between the hard lines on the frame and the calipers or wheel cylinders on the axle. They must flex through full suspension travel and steering lock. Lifting a vehicle, adding longer-travel suspension or installing a different axle can leave stock hoses too short, which stretches them, restricts movement and risks failure.
What you will find here
- **Brake hoses.** Rubber hoses and stainless steel braided versions, sold front or rear, individually or as a pair.
- **Extended-length lines.** Made for a specific lift height, such as 0 to 2.5 inches, or 4 to 6 inches, so the hose has enough slack at full droop.
- **Hard lines and fittings.** Steel lines and fittings used when replacing corroded lines or rerouting.
- **Banjo bolts and bleeder valves.** The hardware that connects a hose to the caliper and lets you bleed the system. Speed bleeders with a check valve make bleeding easier.
- **Line relocation brackets.** These move the brake line away from the axle housing or shock mounts after lifting so it is not stretched or pinched.
Rubber vs. braided stainless
Rubber hoses are what most vehicles use from the factory and are quiet and economical. Braided stainless hoses use a Teflon-type inner liner under a steel braid, which resists expansion under pressure and may give a firmer pedal feel. They are more resistant to abrasion from trail debris. Whichever you choose, the hose should meet applicable standards, and you should check that the hose ends match your caliper style.
Fitment and installation
Brake components are safety critical. Confirm fitment for your exact year, make, model, lift height and axle, and compare against the manufacturer's specifications. Match the stated lift range and the front or rear position.
Brake line work should be done carefully or by a professional. Use the correct flare fittings, tighten banjo bolts with new crush washers to specification, route hoses away from sharp edges and moving parts, and check for leaks. The entire system must be bled with fresh fluid after the work, and the pedal tested before driving. Check that hoses do not bind at full steering lock and full axle droop with the vehicle safely supported. Inspect lines regularly for cracks, bulges and chafing, especially after trail use.
To confirm the right hose, measure the old hose from fitting to fitting and compare the end styles: banjo, inverted flare, or threaded. Check the thread size on the caliper and the frame bracket. Note whether the line is for the front or rear and whether it is sold as a pair. For lifted vehicles, confirm the lift height range listed against your own suspension.
Related parts include new crush washers, banjo bolts, hard line fittings, bleeder valves, and fresh brake fluid. Common mistakes are reusing crush washers, twisting a hose during tightening so it is under torsion, using fittings with the wrong thread, and skipping a final check at full steering lock and suspension droop. Inspect brake hoses at every service for cracking, bulging, leaking at the ends and rubbing marks, and replace the fluid on the schedule in the owner's manual.
Popular Brake Lines & Fittings brands
- Crown Automotive (39)
- Skyjacker (34)
- Pro Comp Suspension (30)
- Rubicon Express (27)
- Omix-Ada (26)
- Rugged Ridge (13)
- Baer Brakes (9)
- TeraFlex (7)
- Classic Tube (5)
- Goodridge (5)
- Dorman (4)
- Jeep (4)
Brake Lines & Fittings FAQ
Do I need longer brake lines after a lift?
Often yes. As suspension travel and ride height increase, stock hoses can be stretched at full droop. Many lift kits list extended lines or relocation brackets. Check the lift kit instructions and the hose lengths shown in the listing.
Are stainless braided brake lines better than rubber?
Braided stainless lines resist expansion and abrasion and can give a firmer pedal feel, while rubber is quiet and economical. Neither is automatically better; choose the right length, fittings and fit for your vehicle.
What is a brake line relocation bracket?
It is a bracket that moves the flexible brake hose away from where lifted suspension or a larger axle could pinch or stretch it. They are usually sold as a pair and are specific to a vehicle or axle.
Do I have to bleed the brakes after replacing a hose?
Yes. Opening the hydraulic system lets air in, and the brakes must be bled before driving. Use fresh fluid of the type specified for the vehicle and have a professional do the job if you are unsure.














