Select your vehicle

Moog Steering Tie Rod End – Left Outer – ES800881

Moog

$103.78In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 16, 2026 6:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 4WD 2011–2016 Ford F-250 and 2008–2016 F-350 Super Duty
  • Left outer tie rod end, OE replacement
  • Greaseable socket with protective cover plate

Description

Overview

The Moog ES800881 is a left outer tie rod end for 4WD 2011–2016 Ford F-250 and 2008–2016 Ford F-350 Super Duty trucks. It is an OE-replacement part sold individually.

Moog gives it an exclusive cover plate that protects against contaminants leaking into the bearing surface, and a greaseable socket so fresh lubricant can flush out contaminants, reducing corrosion and wear. A powdered metal gusher bearing lets grease flow through to the stud for less friction and more strength, a patented cover plate allows tighter tolerances for a more durable part, and patent-pending Sunoloy-coated metal bearings provide smooth stud swing. Moog also warns that loose or worn chassis parts can cause early tire wear.

Key features

  • Left outer tie rod end
  • For 4WD models
  • Exclusive cover plate keeps contaminants out of the bearing surface
  • Greaseable socket
  • Powdered metal gusher bearing
  • Sunoloy-coated metal bearings, patent pending
  • Sold individually

Keeping tie rod ends in service

Outer tie rod ends connect the steering knuckle to the steering linkage and take steering and road shock on every drive. Because they are at the wheel end, they are exposed to water, grit and road salt. Checking the joint for play and torn boots helps catch wear before the alignment drifts or the tires start to scallop.

When one tie rod end is replaced, the opposite side is often inspected at the same time, and the inner tie rod ends and any adjusting sleeve should be checked for play and damage. After installation, a front-end alignment is needed to set toe correctly. Greasing a greaseable socket at regular service intervals helps keep the joint working freely.

  • Check for play by hand at the stud
  • Inspect the boot and seal for cracks
  • Re-check alignment after any replacement

Specifications

Brand Moog
Part number ES800881
Product Left outer tie rod end
Drivetrain 4WD models
Replacement type OE replacement
Socket Greaseable
Bearing Powdered metal gusher design
Quantity Sold individually
Fitment type Direct fit

Vehicle fitment

It fits the 2011–2016 Ford F-250 Super Duty and the 2008–2016 Ford F-350 Super Duty, in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims.

This is the left side for 4WD trucks, so the right side tie rod end and 2WD trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the socket is greaseable, it can be lubricated to push old grease and contaminants out of the joint, which Moog says reduces corrosion and wear.

Fitment

VehicleYearsTrims
Ford F-250 Super Duty2011–2016King Ranch, Lariat, Platinum, XL, XLT
Ford F-350 Super Duty2008–2016Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which side is the Moog ES800881?

It is the left outer tie rod end for 4WD models and is sold individually, so the right side uses a different part number and needs its own tie rod end.

Is the ES800881 for 4WD trucks?

Yes. It is made for 4WD models, and it fits the 2011–2016 F-250 Super Duty and the 2008–2016 F-350 Super Duty. Confirm your drivetrain and trim before ordering.

Is the ES800881 greaseable?

Yes. The socket is greaseable, so fresh lubricant can flush out contaminants from the joint. This helps reduce corrosion and wear in the assembly over time.

How can I tell if a tie rod end is worn?

Look for looseness at the stud, a clunk when turning, or uneven tire wear along the tread. Wandering steering or a steering wheel that sits off center can also point to a worn tie rod end.

Should both tie rod ends be replaced together?

Not always, but inspect both outer ends and the inner ends at the same time. Replacing a worn end alongside a worn partner keeps the steering geometry matched and reduces repeat alignment work.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon